|
| auute6 |
|
|||
|
hi have an au2 have split in firewall any ideas how to fix
|
|||
| Top | |
|||
| easpak91 |
|
|||||
|
I made up 2 steel plates with holes in the middle and holes for bolts to go through , removed clutch cable fitted the plates one on engine side and one on cabin side drilled threw firewall where holes for bolts were to go and clamp together using bolts (use loktite or something sim on nuts). I also weld the cable sleave to the plate on the engine side just to give it that little bit extra. Its worked for me and havent had a prob with it for near on 5years now. I did some drawings (not to scale) to give ya some idea on what i did, sorry its not perfect
_________________ WHO EVER SAID "TWOS COMPANY THREES A CROWD" OBVIOUSLY NEVER HAD A THREESOME |
|||||
| Top | |
|||||
| Johnson stroker |
|
|||
|
this is the first AU with a firewall cracking i have heard of! I have heard of them leaking before but never a crack until now.
same fix for Au firewall as for E-Series.
_________________
|
|||
| Top | |
|||
| foggy |
|
||
|
I used a similar arangement of 2 plates on my AU1 and its still going fine over 12 months later.
|
||
| Top | |
||
| cjh |
|
|||
|
You will find it very difficult to weld an AUII fire wall, as they are laminated with a urethane inner.
Ford did this for NVH reasons. Plating it by using 3/16" stainless steel rivets may be the go.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| cjh |
|
|||||
|
I just found the info on the firewall.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||||
| Top | |
|||||
| auute6 |
|
|||
|
thanks for the info guys i appreciate it
|
|||
| Top | |
|||
| Mad2 |
|
|||
|
easpak91 wrote: I made up 2 steel plates with holes in the middle and holes for bolts to go through , removed clutch cable fitted the plates one on engine side and one on cabin side drilled threw firewall where holes for bolts were to go and clamp together using bolts (use loktite or something sim on nuts). I also weld the cable sleave to the plate on the engine side just to give it that little bit extra. Its worked for me and havent had a prob with it for near on 5years now. I did some drawings (not to scale) to give ya some idea on what i did, sorry its not perfect for my x's ea i just made the one plate [with rivets to hold it as tooo much crap to remove re fire] with the locator for the cable welded on............if you have a laminated firewall two plates would be betterer |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 139 guests |
