|
| marxr8 |
|
|||
|
hi guys
sorry if im in the wronge forum. My clutch cable stoper has been pushed through the the fire wall, not all the way mabey half inch though. Has anyone had this problem and what did you do about it. Just some advice on what to do would go a long way. Apparently this is common on e serise falcon with aftermarket heavy clutch. i will put up a pic soon. Cheers
_________________ Thats a sweet ride you got there! don't tuch it, dont even look at it |
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
yeah its very common. Do a search for damaged firewall. your gonna need to get it welded. stop driving it before you pull it right through and end up having to spend even more to repair greater damage.
_________________
|
|||
| Top | |
|||
| cjh |
|
|||
|
Something that I have found is that the rubber insulator that is down at the bellhousing is too soft.....you lose as much as 4mm in travel. A fix that works is to fit a wide band hose clamp around the black plastic housing that the rubber bush is in.
One of the main reasons I have found that firewalls crack is from over-adjusted clutch cables....due to either, adjusted incorrectly from the start, or a worn clutch.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| EF_96_XR |
|
|||
|
dc_todd wrote: yeah its very common. Do a search for damaged firewall. your gonna need to get it welded. stop driving it before you pull it right through and end up having to spend even more to repair greater damage. Yes definatly dont drive it lol, i drove mine for 2 weeks with the bent in around the clutch hole becoz i had to, and the clutch cable snapped from rubbing, i have scince had it reinforced with a heavy steel plate, will get some pics up, the pedal boxes also fail. a mate of mines did and we had to get the pedal box out and welded 
_________________ 96 EF XR6 Factory 5 sp, currently in the middle of building a new motor |
|||
| Top | |
|||
| TROYMAN |
|
||
|
|||
| Top | |
||
| marxr8 |
|
|||
|
thanks troyman thats awsome ill give it a genda
_________________ Thats a sweet ride you got there! don't tuch it, dont even look at it |
|||
| Top | |
|||
| marxr8 |
|
|||
|
Hi guys
just finished instaling that plate from the tech doc and it works great cheers guys. BTW i recone every one with an e serise should do this cos looking at the bit that snaped, im not suprised. Cheers
_________________ Thats a sweet ride you got there! don't tuch it, dont even look at it |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
marxr8 wrote: Hi guys just finished instaling that plate from the tech doc and it works great cheers guys. BTW i recone every one with an e serise should do this cos looking at the bit that snaped, im not suprised. Cheers Funny this thread came up , i made the plate today cos I was bored at work lol, my clutch is fine but better to re-enforce it before it pulls thru
_________________ El XR6 Turbo |
|||
| Top | |
|||
| marxr8 |
|
|||
|
how cool is making bits for your car at work haha
_________________ Thats a sweet ride you got there! don't tuch it, dont even look at it |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
Very cool lol I've made a few things now
_________________ El XR6 Turbo |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 200 guests |
