|
| BenJ |
|
||
|
Hi All
If I have a car with ABS and busted diff, can I get a diff without ABS and put it in the car? What would I have to swap to keep the ABS working? Is it just a case of swaping the axles if the ratio and splines are the same? or is there other differences. Regards BenJ
_________________ {DESCRIPTION} - Current Ride |
||
| Top | |
||
| Krytox |
|
|||
|
you'll need to replace axles and the backing plate for the ABS sensor.
diff will be the same. I believe if you get an EA-EB1 with abs, it will have 25 spline axles, EB2 and up will have 28.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| BenJ |
|
||
|
{USERNAME} wrote: you'll need to replace axles and the backing plate for the ABS sensor.
diff will be the same. I believe if you get an EA-EB1 with abs, it will have 25 spline axles, EB2 and up will have 28. Cool, thanks for that. So then, if the receiving car is a 94 ED and the donor diff is from a 93 EB all should match up then. BenJ
_________________ {DESCRIPTION} - Current Ride |
||
| Top | |
||
| xpression |
|
|||
|
theorectically yes,
|
|||
| Top | |
|||
| chipyyyy |
|
||
|
Does this hold true for v8 as well? Have a eb1 fairmont v8 with no abs and 3.9 gears. Want to swap into eb2 xr8 with abs.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 53 guests |
