|
| Beefcake |
|
||
|
i dont no the diff ration wer can i find it out
_________________ neva there in a ford corsair/nissan pintara
|
||
| Top | |
||
| pinkbits8u |
|
|||
|
jack up car
mark the tailshaft near the diff and on the diff so the lines match up mark the wheel and the ground so the marks line up turn tailshaft counting how many turns it takes to turn wheel around one complete revolution if its 3 times its a 3 to 1 ratio if its 3.5 times its 3.5 to 1 ratio a more accurate way is turn the tailshaft and count the revolutions it takes to turn the wheel 10 times divide this number on a calculator 10 times and thats your diff ratio if you turn tailshaft 34 and a quarter turns put 34.25 in your calculations for a more accurate ratio |
|||
| Top | |
|||
| Beefcake |
|
||
|
i dont have a 200sx diff
_________________ neva there in a ford corsair/nissan pintara
|
||
| Top | |
||
| pinkbits8u |
|
|||
|
sorry stuffed up , realised after i posted it
ring wrecker or a 4cyl club , thats gotta be your best bet or even a forum for hot 4s / turbo or similiar |
|||
| Top | |
|||
| Beefcake |
|
||
|
nah its right. ill try that
_________________ neva there in a ford corsair/nissan pintara
|
||
| Top | |
||
| EL XR8 |
|
|||
|
Hey Smoke_Rubber.
My Manual EL, has 3.45's. It sits on about 2,100 at 110km/h. Its dead on 2 grand at 100km/h. I don't know whether it would matter cause its an 8??? Can only get around 100km/h out of it in 2nd. Dave |
|||
| Top | |
|||
| -clampy- |
|
||
|
^ thats the same as i get from my manual EB v8 with a 3.27. and it also redlines at 100kmh in second.
in 5th: 2000 at 100, 2200 at 110. in 4th: 2000 at 80kmh in 3rd: 2000 at 60kmh in 2nd: 2000 at 40kmh
_________________ current ride: worn out chuck taylors |
||
| Top | |
||
| veeate |
|
|||
|
Beefcake wrote: i dont no the diff ration wer can i find it out The ratio should be stamped on the Crown....thats the big gear that the hemisphere bolts on to...
|
|||
| Top | |
|||
| DjeMz |
|
||
|
so wat type or diff duz my au v8 fairlane have??
LSD? |
||
| Top | |
||
| veeate |
|
|||
|
id be p****d if it doesnt have an LSD...it should do....go sit on the brake and see if it leaves 2 nice fat strips.........as for the ratio, jack the car up and see what the tag on the diff has stamped on it....im gonna take a guess and say 3.45....could be wrwong but....what revs does it sit on at 100 kays??
|
|||
| Top | |
|||
| DjeMz |
|
||
|
ill have a look tonight... i cant jack up the car, but i will see wat it sits on.
|
||
| Top | |
||
| Mr.Kiss |
|
|||
|
My car car is a EF auto and at a 100KM it sits at 1700rpm. any idea what diff ratio? 3.08 or 3.23??
_________________ My Cars |
|||
| Top | |
|||
| Mr.Kiss |
|
|||
|
Doesnt matter i just found the sticker on the drivers side of the axel, 3.23 single spinner!!!
_________________ My Cars |
|||
| Top | |
|||
| Tomek |
|
||
|
EDIT didnt notice this goes from a year back lol
But anywho... pretty informative this is, i thought there was only 3 diffs (single spinner, LSD and mini spool) |
||
| Top | |
||
| NIGHTHAWK |
|
||
|
Without pulling the diff apart how can you tell what you have got.? I do know that both wheels turn at the same time on my xf s pak. I have even been able to make the wheels spin (noise) in 3rd gear, however its annoying and cornering is terrible. I dont know why someone would put this type of diff centre in it.My other question is can the centre be changed without removing the axle.
_________________ UNTO THYSELF BE TRUE |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 146 guests |
