|
| Fev |
|
|||
|
so an entire new centre would probably be a good bet. Whats the usual price for a 3.45 4-pinion centre?
_________________ 1993 ED XR6 5spd/LSD |
|||
| Top | |
|||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
what internals would a EA 3.23 LSD have. 2 pinion 25 spline etc etc???
it also has the early style tail shaft to pinion bolt on. can i just unbolt that and put the later style on?
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| Dansedgli |
|
||
|
Ea-EB1 had 25 spline.
Need to set preload if changing the pinion,not easy. Change tailshaft instead. |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
can't you just unbolt the tail shaft thing (whats it called) off the front and put the EB one on?
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| Dansedgli |
|
||
|
You could probably change the flange on the tailshaft easily but not the flange on the diff.
The bolt that holds the flange to the diff also sets the preload for the diff gears. Touching it could throw the preload out and stuff the gears if not done right. |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
dammit. and 25 spline 2 pinion won't handle skids well will it
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
WILDEB wrote: dammit. and 25 spline 2 pinion won't handle skids well will it Nowhere near as well as a 28 spline 4 pinion will. Be patient & wait for a 28 spline 4 pinion diff to pop up, but keep the cash handy to jump on one when it does. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
it's sitting there! but everyone on here wants like 300 and aren't in vic
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| EDXR6-Poly |
|
|||
|
WILDEB wrote: can't you just unbolt the tail shaft thing (whats it called) off the front and put the EB one on? Yes you can I have stuck a XF LSD in a EA falcon before and changed the diff/tail shaft flange over to take the better tail shaft they are compatible .... Hope that helps but the 4 pinion will handle the power better and for longer than the 2 pinion will (I have had full spools, mini spools, lockers, rtv diff centers with manual diff lock setup via relay in a AU ute and 4 pinion LSD's all over all depends what you are going to use it for? Mini spool = wank factor full spool = drift/track/strip work LSD = daily with both legs supporting the power BA RTV locker = recreational ute that may require a locker
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
WILDEB wrote: it's sitting there! but everyone on here wants like 300 and aren't in vic For a good one that is fair money, have you priced what it costs to get them rebuilt? Not to mention what most wreckers want for them these days! Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| TimmyA |
|
|||
|
I chose the Lokka, because for 1) Nobody has has LSD's for sale out here, they all seem to come up in the capital cities and thats way too far for me to drive... 2) Cost was virtually the same & for 3) It fitted inside my existing diff and I could do it myself without having to re-shim anything... The added bonus was unlike a 15 odd year old LSD that probably has worn clutches, a Lokka doesn't wear out...
Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| Troy |
|
||
|
timmytimtim wrote: I chose the Lokka, because for 1) Nobody has has LSD's for sale out here, they all seem to come up in the capital cities and thats way too far for me to drive... 2) Cost was virtually the same & for 3) It fitted inside my existing diff and I could do it myself without having to re-shim anything... The added bonus was unlike a 15 odd year old LSD that probably has worn clutches, a Lokka doesn't wear out... Cheers, Tim what brand/size did you get? |
||
| Top | |
||
| TimmyA |
|
|||
|
Second hand off it... It suits the 4 pinion 28 spline Live Diffs... Model LR68 or something like that from memory...
 These are pics of mine gearbox-suspension-brake-driveline-f4/locka-4wd-diffs-t88690.html?hilit=lokka Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
i got the diff off my mate. EA 3.23LSD and the tail shaft to suit. the EB doesn't have a s**t load of power that it's gunna blow diffs up. the one in it now has bent axles and leaks every seal possible. damn wreckers.
i'm gunna try blow it up and heathcote drags next weekend
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| JackoTJK |
|
||
|
you forgot to mention that if you pour the power on with a locker things can turn bad quickly, going from differentiating to locked and spin out. I'd prefer an LSD on a circuit and a locker in a straight line personally...
Also I'm looking out for someone who might be able to do me up a 9" with LSD, 3.45:1 Ratio to fit an AU. I can organise a live axle diff to go off. Want to retain factory fitment and shock mounts and fit BA brakes to the rear, and a yoke and axles that can cope with anything i can throw at it with 400+RWKW
_________________ JackoTJK |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 151 guests |
