Hey guys,
Anyone know the pin descriptions for the EAII 4speed.

Here you go.

4 Speed Auto Trans Computer (TCU)
PIN wire colour Description Notes
1 Blue/Yellow Temp Sensor (input)
2 Orange Diagnostics (input)
4 Blue Air Con status (input)
5 Blue/Orange Temp Sensor ground
6 Pink Ignition system, engine speed signal (input) loom pink/blue behind cluster
7 Green Solinoid 5 return (input)
8 White/Red Diagnostics (ground)
9 Blue/White Throttle Position (ground)
10 Violet/White Shift Lever Position (ground)
11 Green/Yellow Solinoid 4 (input)
12 Green/Black Solinoid 1 (output)
13 Yellow/Red Solinoid 6 (output)
14 Green Mode indicator dash light (output) Negative (-)
15 Yellow/Black Battery Positive (power)
16 Blue/Red Throttle Position (input)
17 Violet Shift lever (input)
18 Red Econ/Preformance Mode switch (input) Negative (-)
19 White Shaft SApeed Sensor (input)
20 Green/Blue Diagnostics (output)
21 Black Ground
25 Blue/Green Throttle position sensor reference 5v (power)
26 Green/Red Solinoid 3 (input)
27 Green/White Solinoid 2 (input)
28 Yellow/Green Solinoid 7 (output)
29 Yellow Solinid 5 (output)
30 Red/Green Ignition switch (power)

THANKYOU THANKYOU THANKYOU

You're a bloody lifesaver!

THANKYOU THANKYOU THANKYOU

You're a bloody lifesaver!

No drama, doing a 4 speed auto conversion ?