|
| twase |
|
|||||
|
I have what I suspect is an ED pedal box and after some research I have discovered that I can modify it to suit an EF but the detail is very thin. First I need to confirm it is an EA-ED and second I need to confirm what to modify.
The bracket circled in RED I assume is the hand brake bracket and I need to remove this? The captive bolts circled in purple need to be removed and the holes enlarged to suit the different mounting of the steering column, correct? Is there any other changes?
_________________ BF Fairmont Ghia Series II update. |
|||||
| Top | |
|||||
| fordzatmyplace |
|
||
|
I >CAN< Confirm that is a boxcar pedal box for you mate. Its exactly the same as the one i pulled out of my NC
Unfortunatly i can't tell you what mods need to be done 
_________________ ^^^ What He Said
|
||
| Top | |
||
| stockstandard |
|
|||
|
yeah you got an ea-ed box there
you can see the differences here (black ed, rust ef) 
To make it fit into an EF you need to hack to top bolts out so the ones in the ef column can pass through 
The hand brake bracket can be cut off or just bent out the way
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| twase |
|
|||
|
Thanks stockstandard,
This might be a bonus anyway as I can mount a better brake switch instead of the failure prone EF one.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| rushed |
|
|||
|
so i can use my ea manual pedal box on my ef?
|
|||
| Top | |
|||
| stockstandard |
|
|||
|
rushed wrote: so i can use my ea manual pedal box on my ef?
EA's are slightly different again. If you look on those pedal boxes I posted pics of you see that on the side of the box (inline with the brake pivot bar on the opposite side to the clutch) there are two holes. These are used to mount some of the electronics under the dash of the ef's but that part of the pedal box is missing on the ea's. You can still use it but you have to secure the electronics some other way (i.e. handful of cable ties).
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| twase |
|
|||
|
stockstandard wrote: rushed wrote: so i can use my ea manual pedal box on my ef? EA's are slightly different again. If you look on those pedal boxes I posted pics of you see that on the side of the box (inline with the brake pivot bar on the opposite side to the clutch) there are two holes. These are used to mount some of the electronics under the dash of the ef's but that part of the pedal box is missing on the ea's. You can still use it but you have to secure the electronics some other way (i.e. handful of cable ties).
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| twase |
|
|||
|
stockstandard wrote: yeah you got an ea-ed box there The RHS of the large angled bracket with the three holes at the top of this picture looks different between ED and EF or is that just camera angle?
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| arm79 |
|
|||
|
Its the camera angle.
|
|||
| Top | |
|||
| twase |
|
||||||
|
I picked up an Auto pedal box yesterday and installed a new clutch pedal shaft and transplanted the brackets from the EA pedal box.
_________________ BF Fairmont Ghia Series II update. |
||||||
| Top | |
||||||
| samftr |
|
|||
|
I have some pics of when I fitted the ea wagon's pedal box into my ef.
anyone wana see?
_________________ 175.7hp 15.5 @ 374,000km
|
|||
| Top | |
|||
| nicco |
|
|||
|
sorry to thread mine a bit here guys,
but i am looking at getting an EB2 5 speed and swapping boxes with my EF auto. Will the EF auto pedal box fit into the EB? and reading this, i should be able to just cut those holes at the top of the EB box and it'll fit the EF? Is that correct? |
|||
| Top | |
|||
| snap0964 |
|
|||
|
Your question has already been answered at http://www.fordmods.com/forums/viewtopic.php?t=51031.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| nicco |
|
|||
|
yeah, sorry, i dug up this old thread, then thought it would be easier to just put everything together.
sorry bout that!!
|
|||
| Top | |
|||
| whitesky94 |
|
||
|
hey im doing a manual conversion and ive installed an eb ed manual pedal box in my 94 ef and im unsure where to wire the clutch up to? the brake was straight forward but the two wires on the clutch im not sure about.... are they needed? will this affect the car in anyway???
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |
