Fordmods Logo

Early gear changes and holding gears 

 

Page 1 of 2 [ 18 posts ] Go to page 1, 2  Next

 
 Post subject: Early gear changes and holding gears
Posted: Mon Jun 14, 2010 11:18 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 3382

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia

I did a engine swap on the weekend and now even if you have the pedal flat to the floor it'll early shift at 3000rpm. it also won't kick down when you accelerate and if just cruising along under light throttle it will hold gears.
e.g won't go 1st-2nd till 30kms
2nd-3rd till 60 kms

so if cruising at 50 it holds second like i'm some sick mad prick being a wanker and it's really annoying and i'm guessing not good for the auto.

if you hold it flat and manual shift it up the gears it'll change as soon as the next gear is selected

any ideas?

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph

Top
 Profile  
 
 
 Post subject: Re: Early gear changes and holding gears
Posted: Tue Jun 15, 2010 10:40 am 
Getting Side Ways
Offline

Age: 33

Posts: 1109

Joined: 4th Sep 2009

Ride: 92 EB s

Location: DORRIGO
NSW, Australia

Sounds like its automatic.
Top
 Profile  
 
 
 Post subject: Re: Early gear changes and holding gears
Posted: Tue Jun 15, 2010 10:47 am 
Getting Side Ways
Offline

Posts: 2464

Joined: 5th Nov 2004

Gallery: 7 images

Location: Brisbane
QLD, Australia

TPS Stuffed?
Top
 Profile  
 
 
 Post subject: Re: Early gear changes and holding gears
Posted: Tue Jun 15, 2010 10:48 am 
Getting Side Ways
Offline

Posts: 2464

Joined: 5th Nov 2004

Gallery: 7 images

Location: Brisbane
QLD, Australia

Just thinking - is this the EA? - is it a 3 speed? - sounds like you might not have the kickdown installed.

Or.. if its pre EB 2, one of the TPS's isnt connected

Nigel
Top
 Profile  
 
 
 Post subject: Re: Early gear changes and holding gears
Posted: Tue Jun 15, 2010 10:57 am 
Getting Side Ways
Offline

Age: 33

Posts: 1109

Joined: 4th Sep 2009

Ride: 92 EB s

Location: DORRIGO
NSW, Australia

Did your car originaly have econ and power mode?
My mates auto xr6 had it and if it was in economy mode it would drive like you have described.
Top
 Profile  
 
 
 Post subject: Re: Early gear changes and holding gears
Posted: Tue Jun 15, 2010 7:58 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 3382

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia

both my cars are 4 speed autos.

the TPS's are plugged in. there are two. i even tried swapping plugs over. still did it. seems funny it only started doin it once i swapped engines. i used the old manifold so the only thing changed was the engine itself

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph

Top
 Profile  
 
 
 Post subject: Re: Early gear changes and holding gears
Posted: Wed Jun 16, 2010 1:48 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 3382

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia

so i spoke to the guy at Fluid drive here in town and he reckons the auto has lost it's TPS reference. who know's how to back probe the TCM to see if it's getting a voltage reference from the TPS?

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph

Top
 Profile  
 
 
 Post subject: Re: Early gear changes and holding gears
Posted: Wed Jun 16, 2010 1:50 pm 
Getting Side Ways
Offline

Age: 51

Posts: 572

Joined: 30th Apr 2009

Ride: 92 EB Falcon

87SIlude wrote:
Sounds like its automatic.

Yep spot on!
Top
 Profile  
 
 
 Post subject: Re: Early gear changes and holding gears
Posted: Wed Jun 16, 2010 7:25 pm 
Getting Side Ways
Offline

Age: 34

Posts: 971

Joined: 18th Dec 2008

Ride: BA Futura

Location: Hobart
TAS, Australia

WILDEB wrote:
so i spoke to the guy at Fluid drive here in town and he reckons the auto has lost it's TPS reference. who know's how to back probe the TCM to see if it's getting a voltage reference from the TPS?


You would probably be better off to measure it directly from the TPS, I would think.

If no one can tell you what it should be outputting then I'll look it up in the manual if you want mate.

Or you could just try swapping it over? Might be easier than buggering around testing it, if you have one that's known to be okay that is :p

 

_________________

Image
DCII LTD V8 - leather - low k's
1978 XC '1/2' 500 project 302C
BA Futura wagon
P38 Range Rover HSE

Top
 Profile  
 
 
 Post subject: Re: Early gear changes and holding gears
Posted: Wed Jun 16, 2010 7:42 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 3382

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia

i swap the engine plug with the gearbox plug. made no difference

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph

Top
 Profile  
 
 
 Post subject: Re: Early gear changes and holding gears
Posted: Wed Jun 16, 2010 8:11 pm 
Getting Side Ways
Offline

Posts: 2464

Joined: 5th Nov 2004

Gallery: 7 images

Location: Brisbane
QLD, Australia

Actually the guy makes sense - there is a procedure to learn the TPS for the Autos. Something like start the car, leave it in neutral for a couple of mins, then stop the car, key in on, Hold throttle flat, and wait 2 mins...
.. but I know thats not it exactly. The procudure teaches the TCM the TPS values for open, and closed, and it can work from there.

it is in the service manuals for the cars...
Top
 Profile  
 
 
 Post subject: Re: Early gear changes and holding gears
Posted: Wed Jun 16, 2010 8:41 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 3382

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia

but i used the same manifold. and i've had the battery disconnected heaps of times and had no problems before

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph

Top
 Profile  
 
 
 Post subject: Re: Early gear changes and holding gears
Posted: Wed Jun 16, 2010 8:54 pm 
Getting Side Ways
Offline

Posts: 2464

Joined: 5th Nov 2004

Gallery: 7 images

Location: Brisbane
QLD, Australia

Er - if you think you have changed nothing and your not listening for posibilities, why ask!.

Just making suggestions. I, like most of the members here have had more than my fair share of falcons (and their problems).

Good luck!

Cheers

Nigel
Top
 Profile  
 
 
 Post subject: Re: Early gear changes and holding gears
Posted: Wed Jun 16, 2010 8:58 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 3382

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia

and your not listening to me. i used all the original bolts ons

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph

Top
 Profile  
 
 
 Post subject: Re: Early gear changes and holding gears
Posted: Wed Jun 16, 2010 9:06 pm 
Getting Side Ways
Offline

Posts: 2464

Joined: 5th Nov 2004

Gallery: 7 images

Location: Brisbane
QLD, Australia

Your thinking inside the box. Your ECU and TCM are not that easy to predict.

Anyway - Im no longer watching the topic. Best of luck - I hope you can figure the problem out.

Nigel
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 18 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 62 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Nov 16, 2024 10:48 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names