|
| gareth |
|
||
|
hello need help on clutch there is a clutch idle switch on the pedal but to were to plug it in to the ghias wiring loom is it needed or were do i wire it up too thanks
|
||
| Top | |
||
| TROYMAN |
|
||
|
hi
afaik its not really needed unless you have cruise controle. its to disable your cruise controle when you press the clutch. there still should be a plug tucked away for it somewhere. my ea has the switch on the pedal box and has not been conected since i fitted a el ecu. |
||
| Top | |
||
| gareth |
|
||
|
ok there are to switches on the clutch pedal 1 is vacaum thats for the criuse control the other 1 is for idle this 1 i cant find were to plug it in on the eb2 fairmont ghias wiring loom most people think its for the criuse control not that 1 any help thanks
|
||
| Top | |
||
| Paulmac |
|
||
|
Gareth,
As far as I can tell, there should be a plug with a black/white and an orange/black wires above the clutch position. If the rain eases up I will check the 'Mont dash I just pulled [it's outside covered by a tarp] and see if I can locate it. It may be tucked up out of the way behind the climate control loom. Are the wire colours on your switch the same as I have mentioned? Paul
_________________ What goes around, comes around. |
||
| Top | |
||
| gareth |
|
||
|
thanks for this yes those two colors with a funny plug on the end goes into the right hand side loom of steering wheel on eb cant find it on my eb2 ghia fusebox wont come out
|
||
| Top | |
||
| gareth |
|
||
|
finished installing t5 with ed xr6 manaul computer didnt need the idle switch on the clutch pedal runs sweetas way more power now over a auto best thing i ever done thanks for the help gareth
|
||
| Top | |
||
| Paulmac |
|
||
|
Gareth,
Glad to hear it's all sorted, we will have to look you up next time we're over there. Cheers, Paul
_________________ What goes around, comes around. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 24 guests |