|
svosprint94 |
|
|||
|
hi guys need some help i have done 3rd gear and the cluster gear in my ed zr8 sprint manual does anybody know if the cluster gear out of a mustang t5 w/c gearbox they have the same teeth count same ratio etc the part number on the sprint cluster is b86 the mustang 1 is 086 any help greatly appreciated its going to cost 1200 just for parts over here thanks guys
damo |
|||
Top | |
cjh |
|
|||
|
I wouldn't be suprised if the Sprint box was a 'Stang box.....the ED Sprint had it's own, they were different to a normal XR8.
The Sprint had a 3.35:1 first gear, as opposed to the XR8's 2.95:1. 5th gear and Reverse are the same ratios however.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
Top | |
roodogg |
|
||
|
i rececntly rebuilt my sprint box, using parts from the states. i didnt need to replace the cluster though. i see no reason for it to be any different than the aussie ones, just count the teeth, you should have a 23t input. fyi. i replaced 2nd, 3rd, and all bearings using parts from the gearbox.org.
the input shaft i had to get from a 94 cobra and machine a few mm off the end. try and find genuine tremac, not cheapo parts from india. prices have gone up a lot lately due to tremac no longer tooling t5 bits |
||
Top | |
svosprint94 |
|
|||
|
hey buddy thanks very much i dont spose you would have the part numbers for the isa parts yea it does have a 23t count on the input so yeah id you could pm any part numbers you used for the gears and the bearing kit would be greatly appreciated mate as i dont really know what im looking for
thanks damo |
|||
Top | |
roodogg |
|
||
|
sorry for the slow reply mate, took a while to find the old part numbers. 23t input shaft 1352-085-055,i had to get this from Les Ryan auto parts try www.southwestgear.com; it needed about 7mm machined off the end.
the rebuild kit i got from summit. it was the ford racing t5 rebuild kit #fms-m-7000a.as for 2nd and 3rd gear, i cant find the part numbers. i ordered them from the gearbox.org. as long as the teeth count is the same, and they are world class parts you cant go wrong. the gearbox are awesome to deal with, and probably the best priced. again; try and get genuine tremac, or confirmation of quality.i also got the billit cluster support plate, apparently this adds a lot of strength good luck |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 46 guests |