Fordmods Logo

EF BTR 4th gear shift point? 

 

Page 1 of 1 [ 11 posts ] 

 
 Post subject: EF BTR 4th gear shift point?
Posted: Mon Dec 10, 2007 7:37 pm 
Smokin em up
Offline

Age: 48

Posts: 224

Joined: 13th Nov 2004

Ride: EB2 Fairmont

Location: Melbourne
VIC, Australia

Just a bit of a query as to why my EF auto does'nt change to 4th until just on 70klms on very light throttle......It has done 260,000 but i just find it annoying in 60 zones as top gear is just smoother and torquier........Trans has had oil changed already so is this normal or should i replace the solenoid valve???
Top
 Profile  
 
 
Posted: Mon Dec 10, 2007 8:17 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

iirc
thats about the right shift point

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Tue Dec 11, 2007 1:22 am 
Getting Side Ways
Offline

Age: 38

Posts: 3894

Joined: 15th Nov 2004

Gallery: 24 images

Ride: BF MKII V8 Fairmont Ghia

Location: Perth
WA, Australia

yep, thats the exact shift point

flick the economy switch off and it will drop into 4th at 60

 

_________________

2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows

Top
 Profile  
 
 
Posted: Tue Dec 11, 2007 12:48 pm 
Getting Side Ways
Offline

Age: 36

Posts: 1538

Joined: 4th May 2006

Gallery: 4 images

Ride: ef fairmont turbo

Power: 213 rwkw

Location: melbourne
VIC, Australia

mine used to change when ever the gearbox thought it was necessary to, now it wont change unless it gets to 70km/h regardless of how minimal throttle i apply.
i no what you mean though, driving at 65km/h it stays in third. belive it or not its actually better for fuel econamy. ive realisd that it takes a fair bit for the car to gear down from forth. so theres nothin to worry about

 

_________________

96 EF FAIRMONT
Garrett gt40turbo, iceman plenum, ported head, turbo cam, double valvesprings, 023 fuel pump, 36lb injectors 4' cat, 4' dump, 2.5 exhaust, build bottom end, hypertonic pistons rods & rods, king bearings, j3. c10 3500 stall
232rwkw@4psi

Top
 Profile  
 
 
Posted: Tue Dec 11, 2007 6:56 pm 
Smokin em up
Offline

Age: 48

Posts: 224

Joined: 13th Nov 2004

Ride: EB2 Fairmont

Location: Melbourne
VIC, Australia

{USERNAME} wrote:
mine used to change when ever the gearbox thought it was necessary to, now it wont change unless it gets to 70km/h regardless of how minimal throttle i apply.
i no what you mean though, driving at 65km/h it stays in third. belive it or not its actually better for fuel econamy. ive realisd that it takes a fair bit for the car to gear down from forth. so theres nothin to worry about


Ye it seems mine is the same then and i spose wear and tear is the main cause.......I would like to replace the sol valve just to see but they're too expensive just for the exercise! Might see if i can get onto a GC 2nd hand one??? It's not the fuel economy but the smoother/quieter ride i prefer...
Will also try the power mode but that doe'snt make sense as that holds gears for longer not shorter!!!
Top
 Profile  
 
 
Posted: Tue Dec 11, 2007 7:40 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 2550

Joined: 28th Jun 2005

Gallery: 13 images

Ride: EF 5 Speed, XH Uterus :P

Location: Hobart
TAS, Australia

just tried the power mode @ 60 and it does do it. bit of a wtf thing!

 

_________________

Maloo - Holden's word for ugly.

Top
 Profile  
 
 
Posted: Tue Dec 11, 2007 7:52 pm 
Getting Side Ways
Offline

Age: 38

Posts: 3894

Joined: 15th Nov 2004

Gallery: 24 images

Ride: BF MKII V8 Fairmont Ghia

Location: Perth
WA, Australia

They advise you to use economy for towing and city driving.

It stops you from going up and down gears all the time.

Also when towing at city speeds depending on weight - being in overdrive at 60 with a heavy trailer wont be good for the transmission

 

_________________

2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows

Top
 Profile  
 
 
Posted: Tue Dec 11, 2007 8:18 pm 
Getting Side Ways
Offline

Age: 45

Posts: 1329

Joined: 5th Nov 2004

Ride: 66 Coupe

Location: Perth
WA, Australia

would you drive a manual in 5th gear at 60km/h?
Top
 Profile  
 
 
Posted: Tue Dec 11, 2007 9:02 pm 
Smokin em up
Offline

Age: 48

Posts: 224

Joined: 13th Nov 2004

Ride: EB2 Fairmont

Location: Melbourne
VIC, Australia

{USERNAME} wrote:
They advise you to use economy for towing and city driving.

It stops you from going up and down gears all the time.

Also when towing at city speeds depending on weight - being in overdrive at 60 with a heavy trailer wont be good for the transmission



This is true....Reminds me of a VS i drove that used to tow alot.....In economy.......The thing was so used to it it would pull top very easyily but it felt soooo not good thru the whole driveline! And no 5th in manual at 60 is a bit much but 4th in an auto could be done......I'm talking crusing here not stop/start.....That why i luuuv the new man shift auto stuff now....You still have 'some' control! Anyone think i should try the solelnoid valve....I'm really wanting this lower spped change now....and just can't help myself!!!

Last edited by BlkEB2 on Tue Dec 11, 2007 9:30 pm, edited 2 times in total.

Top
 Profile  
 
 
Posted: Tue Dec 11, 2007 9:08 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

{USERNAME} wrote:
would you drive a manual in 5th gear at 60km/h?


yup :)

rode a bike in 6th at 40! :)

pulled cleanly away from that speed too

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Wed Dec 12, 2007 5:24 pm 
Smokin em up
Offline

Age: 48

Posts: 224

Joined: 13th Nov 2004

Ride: EB2 Fairmont

Location: Melbourne
VIC, Australia

{USERNAME} wrote:
just tried the power mode @ 60 and it does do it. bit of a wtf thing!


Well i'll be! Drove mostly in power today and yes it does change earlier (@60k's) which is great.......Then when i got out onto the open sections i used Economy which does lock the verter up quicker in top......So the shift points in Power are wide for the first three then short for 4th....Interesting...and effective......I'm thinking that in the case of towing you obviuosly need the first three to get ur speed up without too much load on the donk.....then at 60....whammo.....ur cruising!!!! Also with it having done a few k's the power is down so it helps to get it movin anyways.....I'm happy now, and that i don't need to fix or change anything :D Thanks for the comments guys!!!
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Dec 27, 2024 5:42 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names