|
| ef2xr6 |
|
||
|
i want to do a manual conversion on my ef xr6 and as the title states, what do i need?
i know i need a gearbox and pedal box (duh) and ECU (will EL XR6 ECU work?) what else do i need? the car is going to get done by a mechanic, i just want to get all the parts myself Thanks in advance |
||
| Top | |
||
| Johnson stroker |
|
|||
|
You cannot use an EL ECU, has to be an EF ECU, EF needs the coil pack control, el was dizzy. gear box with e series bell housing and all associated bits, clutch cable, you can either use a J3 chip on the EF ECU or do the resister trick, plenty of info on the resister trick on this site if you have a quick search around.
_________________
|
|||
| Top | |
|||
| phongus |
|
|||
|
fordmods-technical-documents-diy-f38/auto-to-manual-conversion-guide-t42420.html
Read that, will help a lot.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| dsyfer |
|
|||
|
Get yourself a Mal Wood pin rather than the pedal box, it saves having to pull the dash out.
|
|||
| Top | |
|||
| ef2xr6 |
|
||
|
{USERNAME} wrote: Get yourself a Mal Wood pin rather than the pedal box, it saves having to pull the dash out. where would i get one of these from? |
||
| Top | |
||
| MY.93.ED |
|
||
|
http://www.malwoodauto.com.au/
_________________ Silver EB Fairmont- AU S3 engine, Tickford Head, EF handbrake, T5 manual, EF XR6 3.45 LSD, 2.5" Catback by Rapid Exhaust, EL BBM, EL XR6 ECU, EL Thermos, EB Ghia interior, Kingy Superlows, Monroe struts |
||
| Top | |
||
| GeZza200 |
|
||
|
Old thread i thought i would bring back.
Im doing a conversion with my car to manual and dont really want to pull the dash out what is the Malwood pin? Could someone post a pic if they have one and how much did it cost them? Cheers
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| phongus |
|
|||
|
{USERNAME} wrote: Old thread i thought i would bring back. Im doing a conversion with my car to manual and dont really want to pull the dash out what is the Malwood pin? Could someone post a pic if they have one and how much did it cost them? Cheers here is thread on it post848118.html 2 pictures half way down. Pretty much shows you what it is. The pin will be located to the left of the pedal box where there is a hole in the pedal box frame. You can't miss it. New updated Malwood pin design comes with a large metal plate to strengthen the box because some people have had the pedal box break/crack.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| GeZza200 |
|
||
|
Cheers Phong, saves taking out the dash.
Cheers
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 11 guests |
