|
| xafalcon |
|
||
|
Can anyone direct me to a listing of the fault codes for EF2 V8 BTR97LE transmission. Specifically code 67
_________________ XA Faimont 351C, AU2 XR8 Manual 5.0, DA LTD 5.0, Mk1 Capri 5.0, 1995 Mustang 5.0, EF2 XR8 Manual, EF2 Fairmont Ghia 5.0, AU3 XR8 Auto, AU2 XR8 Auto, AU2 XR8 Manual Ute, TE Cortina 5.0 Manual, DU LTD 5.0 soon to be manual |
||
| Top | |
||
| alpha141 |
|
|||
|
Data link fault between EEC and TCM. TCM can't talk to the EEC, you need to check the cable for any damage or dodgy connection.
|
|||
| Top | |
|||
| xafalcon |
|
||
|
Thanks for the reply. It's in a rod so I no longer have the instrument cluster included. The data link runs from the ecu directly to the tcm. I'll re-check the connection just in case, but it may be something to do with the instrument cluster not being connected any more. It does have a speedo connected
_________________ XA Faimont 351C, AU2 XR8 Manual 5.0, DA LTD 5.0, Mk1 Capri 5.0, 1995 Mustang 5.0, EF2 XR8 Manual, EF2 Fairmont Ghia 5.0, AU3 XR8 Auto, AU2 XR8 Auto, AU2 XR8 Manual Ute, TE Cortina 5.0 Manual, DU LTD 5.0 soon to be manual |
||
| Top | |
||
| xafalcon |
|
||
|
When I built the frankinstein loom (from EB I6 tcm loom & EF ecu loom) I had to re-pin the tcm connectors and was 1 pin out on the data link. When I moved it from pin 17 to pin 18 (where it should have been) everything runs fine. Changes gear properly now.
Thanks for your help with the code, I found the problem in 2 minutes. I may never have found it without your help
_________________ XA Faimont 351C, AU2 XR8 Manual 5.0, DA LTD 5.0, Mk1 Capri 5.0, 1995 Mustang 5.0, EF2 XR8 Manual, EF2 Fairmont Ghia 5.0, AU3 XR8 Auto, AU2 XR8 Auto, AU2 XR8 Manual Ute, TE Cortina 5.0 Manual, DU LTD 5.0 soon to be manual |
||
| Top | |
||
| alpha141 |
|
|||
|
your welcome mate, bet you were kicking yourself being one pin out
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 45 guests |
