|
| ACIDIC |
|
||
|
can anyone tell me where i can get an EF XR8 diff (around newcastle/central coast) and how much it will cost, and will it fit straight in?
i'm in the market for a new diff. cheers Acidic
_________________ 96 R33 Skyline |
||
| Top | |
||
| Krytox |
|
|||
|
Most wrecking yards will have one, but will ask for upto $1K for it.
XR6 are the same. (ratios can be different) Slap it straight in! Average costs for a 3.23:1 or 3.45:1 is about $650 for the LSD, and fitting will vary. I've a 3.45 and a 3.23 here, but thats no good for you.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| twase |
|
|||
|
ACIDIC wrote: can anyone tell me where i can get an EF XR8 diff (around newcastle/central coast) and how much it will cost, and will it fit straight in? It will fit but you may need XR upper control arms.
i'm in the market for a new diff. cheers Acidic More important you will need another speedo drive gear to correct the speedo. If you are auto then you may end up with incorrect shift points if you use the 3.45 ratio.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| eagle performance |
|
||
|
yeah the same they are at most reckers
|
||
| Top | |
||
| ACIDIC |
|
||
|
so if i buy the XR8-XR6 diff, complete with axles etc, it will fit straight in?
much work involved? i would imagine it's a simple, unbolt the other and bolt the new one up.
_________________ 96 R33 Skyline |
||
| Top | |
||
| spaz ef |
|
||
|
just finished the same coverson about two hours ago from 97 xr8 (3.45) to my 94 gli went straight in only thing is you have to use your old top trailing arms and the newer bottom one the rest bolts straght in and did'nt change my speedo drive and it runs fine...
|
||
| Top | |
||
| Swine |
|
|||
Posts: 266 Joined: 16th Feb 2007 |
Acidic[/quote]
. If you are auto then you may end up with incorrect shift points if you use the 3.45 ratio.[/quote] Shift points are based on RPM. I've got 3.9's in my xr8 and shift points are fine. |
|||
| Top | |
|||
| spazz ea |
|
||
|
i did it yesterday i piked up a diff for 500 bucks wit upper and lower control arms and shocks the upper arms wont fit but the lower ones will and my hand brake cable was to short it is a lower ratio its 3 45s but i can smoke second gear and the lower gears increases the rpm by about 200 its an easy swap
|
||
| Top | |
||
| twase |
|
|||
|
Quote: Shift points are based on RPM. I've got 3.9's in my xr8 and shift points are fine. Shift points are Speed not RPM based. If you change your diff to a different ratio and left the speedo gear untouched then nothing has changed except your speedo is now out. Correct the speedo by changing the gear and now the shift points will be wrong. The only correct way of fixing this is to install the ECU that belongs with that diff ratio. AFAIK there is no correct fix for ratios above 3.45 in an EF.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| ceb^sk8 |
|
||
|
kool
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 78 guests |
