Fordmods Logo

EL Pedders Springs Part Nos And Heights 

 

Page 1 of 1 [ 12 posts ] 

 
 Post subject: EL Pedders Springs Part Nos And Heights
Posted: Tue Mar 13, 2007 7:21 pm 
Getting Side Ways
Offline

Age: 42

Posts: 517

Joined: 3rd Dec 2004

Ride: SZ Titanium & ZG Fairlane

Location: Roxby Downs
SA, Australia

Having trouble deciding which springs to get for my EL XR8. I will be getting bilstein short shocks, whiteline swaybars and nolothane bushes. I was getting King Spring Superlows but have since been talked into pedders. I am trying to find out what actual part number pedders springs people have used and what height from the bottom of the rim to the guard they leave the car sitting at. The lowest off the shelf springs that they seem to have are front 590mm and rear 570mm with 17 inch rims. My car is sitting at around 590 front and rear at the moment on standard springs so I want about an inch lower then that.

If you have pedders springs fitted could you please post up the part nos and heights?

Thanks.

 

_________________

Image
F6 Rspec #139 - Stock Car Racing

Top
 Profile  
 
 
Posted: Tue Mar 13, 2007 10:30 pm 
Stock as a Rock
Offline

Age: 39

Posts: 169

Joined: 27th Jun 2005

Gallery: 6 images

Ride: EF XR8 5spd

Location: Newcastle
NSW, Australia

Pictures in gallery, Front part no: 2261, rear part no: 2280
Standard shocks fitted, thats the lowest spring for the front with pedders to go any lower in the front you need to get their front shocks with lowered spring seat.

 

_________________

EF XR8 5spd: 302ci /178rwkw

Top
 Profile  
 
 
Posted: Tue Mar 13, 2007 10:38 pm 
Getting Side Ways
Offline

Age: 42

Posts: 517

Joined: 3rd Dec 2004

Ride: SZ Titanium & ZG Fairlane

Location: Roxby Downs
SA, Australia

So did they lower the ride height from the standard XR height? Bit hard to tell from the pics but it looks like it is sitting about the same as mine is now.

 

_________________

Image
F6 Rspec #139 - Stock Car Racing

Top
 Profile  
 
 
Posted: Thu Mar 15, 2007 10:42 am 
Stock as a Rock
Offline

Age: 39

Posts: 169

Joined: 27th Jun 2005

Gallery: 6 images

Ride: EF XR8 5spd

Location: Newcastle
NSW, Australia

Sorry rear part no is: 2180 not 2280. Car sits a tad lower than standard, but prob not much. Have just fitted Kings super lows and I'm much happier, pedders stuffed me round a bit.

 

_________________

EF XR8 5spd: 302ci /178rwkw

Top
 Profile  
 
 
Posted: Tue Mar 20, 2007 7:41 pm 
Getting Side Ways
Offline

Age: 42

Posts: 517

Joined: 3rd Dec 2004

Ride: SZ Titanium & ZG Fairlane

Location: Roxby Downs
SA, Australia

Thanks for that mate. When you say you are heaps happier with the superlows do you mean you are happier as they are lower then the pedders? Any chance you could measure the height from the centre of your wheel to the guard on the front and rear for me? Or from the bottom of your mag to the guard and let me know what size mag you have?

Cheers.

 

_________________

Image
F6 Rspec #139 - Stock Car Racing

Top
 Profile  
 
 
Posted: Wed Mar 21, 2007 7:30 pm 
Stock as a Rock
Offline

Age: 39

Posts: 169

Joined: 27th Jun 2005

Gallery: 6 images

Ride: EF XR8 5spd

Location: Newcastle
NSW, Australia

Hey mate, When I said happier I meant, happier with the height.

Height with kings SL's: LHF: 575mm (edge of rim to guard w/235/45/17's)
LHR: 572mm " "

Height of car with pedders in pictures was: 585mm front & 595mm rear.

Hope that helps mate.

 

_________________

EF XR8 5spd: 302ci /178rwkw

Top
 Profile  
 
 
Posted: Wed Mar 21, 2007 7:58 pm 
Getting Side Ways
Offline

Age: 42

Posts: 517

Joined: 3rd Dec 2004

Ride: SZ Titanium & ZG Fairlane

Location: Roxby Downs
SA, Australia

Thanks for that mate! You're a legend. I think I will stick with the King Springs Superlows as they are about the look that I want. It should just be over the legal limit here in SA. My only problem is my sub box which will probably make the rear go under the limit. You don't happen to have subs in your car do you? I hate Transport SA.

 

_________________

Image
F6 Rspec #139 - Stock Car Racing

Top
 Profile  
 
 
Posted: Thu Mar 22, 2007 5:24 pm 
Stock as a Rock
Offline

Age: 39

Posts: 169

Joined: 27th Jun 2005

Gallery: 6 images

Ride: EF XR8 5spd

Location: Newcastle
NSW, Australia

Nah no subs.

 

_________________

EF XR8 5spd: 302ci /178rwkw

Top
 Profile  
 
 
Posted: Thu Mar 22, 2007 8:51 pm 
Getting Side Ways
Offline

Age: 42

Posts: 517

Joined: 3rd Dec 2004

Ride: SZ Titanium & ZG Fairlane

Location: Roxby Downs
SA, Australia

thanks for your help mate. As of getting home from work today and looking at my car and measuring and s**t I think I will now order a set of whiteline flatout springs (10mm higher then the kings) but keep the superlows as well incase it is not low enough for me. Jesus I am so undecided.

 

_________________

Image
F6 Rspec #139 - Stock Car Racing

Top
 Profile  
 
 
Posted: Sat Mar 24, 2007 10:24 am 
Stock as a Rock
Offline

Age: 39

Posts: 169

Joined: 27th Jun 2005

Gallery: 6 images

Ride: EF XR8 5spd

Location: Newcastle
NSW, Australia

I expect the car will settle a tad , as I only just put the springs in.

 

_________________

EF XR8 5spd: 302ci /178rwkw

Top
 Profile  
 
 
Posted: Sat Mar 24, 2007 11:00 am 
Fordmods Addict
Offline
User avatar

Age: 38

Posts: 7958

Joined: 1st Jun 2005

Gallery: 13 images

Ride: Falcon

Power: 237 rwkw

Location: Melbourne
VIC, Australia

phatal wrote:
thanks for your help mate. As of getting home from work today and looking at my car and measuring and s**t I think I will now order a set of whiteline flatout springs (10mm higher then the kings) but keep the superlows as well incase it is not low enough for me. Jesus I am so undecided.

I had/have whiteline "flatout" springs in my ED.
I still have the fronts in, sits nice, but the back sat a bit high, so I put lovells ultralows in the rear.
Sits even, would like the a*** a bit lower but meh.
I cant be f**k pulling them out again :lol:
You'll be stoked with them and the bilstien shocks i reckon, good s**t!

 

_________________

ED XR8 Sprint - S-Trim, V500, 249rwkw
BF MKII F6 Tornado - 237rwkw

Top
 Profile  
 
 
Posted: Sat Mar 24, 2007 5:15 pm 
Getting Side Ways
Offline

Age: 42

Posts: 517

Joined: 3rd Dec 2004

Ride: SZ Titanium & ZG Fairlane

Location: Roxby Downs
SA, Australia

If the back sits a bit higher that would probably suit me anyway as I have 2 12 inch subs in a box in the boot so it may even bring it down a bit anyway. Still a couple of weeks to wait till it is done but I am kinda over worrying about which springs to get so Whiteline it is. Hopefully it is all good.

 

_________________

Image
F6 Rspec #139 - Stock Car Racing

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 12 posts ] 

Who is online

Users browsing this forum: No registered users and 29 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Nov 16, 2024 6:14 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names