|
| AdamN |
|
||
|
I have an EL and am getting an EL GT swaybar. Is it a simple bolt on installation or is it more involved?
|
||
| Top | |
||
| GTBob |
|
|||
|
Yes straight bolt on as long as you have all the parts
_________________ Rotten Old Revhead!!! XW GTHO + EF ex cop car (exractors 2.5 cat back zorst !6" Simmons K&N +airbox mods Lowered with Bilstein shocks+Whiteline Bars NEXT THING Swap HO for GTP or Ferrari! |
|||
| Top | |
|||
| Steady ED |
|
|||
|
{USERNAME} wrote: Yes straight bolt on as long as you have all the parts
Yeah, get new rubbers. I don't know whether Ford flog the EL GT bars with new D-Bushes, but you'll need 'Swaybar link bushes' anyway. So get the whole lot.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| AdamN |
|
||
|
ok so do I need saddle bushes ($26 for 2) and the bushes that go on the ends? (apparent 8 @ $2.65 each)
|
||
| Top | |
||
| Steady ED |
|
|||
|
{USERNAME} wrote: ok so do I need saddle bushes ($26 for 2) and the bushes that go on the ends? (apparent 8 @ $2.65 each)
IF Ford don't flog the Bar already with them. They MIGHT, so buy it first and see if they do. Then, if it didn't, you will need the saddle bushes, and the swaybar link bushes. It is 8. 2 on each side where the link connects to the swaybar, and 2 on each side where the link connects to the car. Easy enough job. Couple of things to note. Don't tighten the bushes fully till the car is at 'normal ride height', and don't tighten the bushes enough to cause deformation. If you're going polyurethane (which you should!) make sure you get 'lithium grease' as well, and grease up the faces of all the bushes.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| AdamN |
|
||
|
I rang up already. The bar doesnt come with any bushes. I'm just gonna buy the ones that ford sells.
|
||
| Top | |
||
| Steady ED |
|
|||
|
{USERNAME} wrote: I rang up already. The bar doesnt come with any bushes. I'm just gonna buy the ones that ford sells.
You'll actually need there saddle bushes now that I think about it, i don't know of anyone else that does them in 28mm. But get polyurethane swaybar links bushes!!! Trust me! Last longer, and will increase the effect of the swaybar.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| AdamN |
|
||
|
How much are polyurethane swaybar links bushes? I mean the ford ones are only $21.20 for 8.
|
||
| Top | |
||
| Steady ED |
|
|||
|
{USERNAME} wrote: How much are polyurethane swaybar links bushes? I mean the ford ones are only $21.20 for 8.
I paid around the $20 mark from Autobarn, for 'Nolathane' brand ones.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| twr7cx |
|
|||
|
it's a peice of piss to change (so long as the bolts on the D bracket are alright). I fitted a whiteline front a while ago. Didn't replace my slink bushes as they were still in fine condition and are nolathanes already. did regrease them but.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 24 guests |
