|
| Falcon96XR6 |
|
|||
|
Hey there,
When i convert the EL to T5, can i reuse the same 6 bolts from my flex plate from the auto in my flywheel? Or do i require a different length bolt? That is all, Thank you (:
_________________ EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy |
|||
| Top | |
|||
| cjh |
|
|||
|
Same bolts......use Loctite 271 on the threads....make sure the threads and mounting faces are clean, and torque to 30 Nm then 115 Nm.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Mad2 |
|
|||
|
{USERNAME} wrote: Same bolts......use Loctite 271 on the threads....make sure the threads and mounting faces are clean, and torque to 30 Nm then 115 Nm.  i was sure the ones outa me EA manual were longa than the auto??
|
|||
| Top | |
|||
| Matt_jew |
|
||
|
Manual bolts are longer then the auto ones.
_________________ {USERNAME} wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| Falcon96XR6 |
|
|||
|
Okay? So do i get longer bolts or use the auto ones lol? How long do they need to be if i need to get new ones, cheers
_________________ EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy |
|||
| Top | |
|||
| mitchell g |
|
||
|
{USERNAME} wrote: Okay? So do i get longer bolts or use the auto ones lol? How long do they need to be if i need to get new ones, cheers i used my auto bolts in my manual, so did my older brother and our mate, never had any issues |
||
| Top | |
||
| cjh |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: Okay? So do i get longer bolts or use the auto ones lol? How long do they need to be if i need to get new ones, cheers i used my auto bolts in my manual, so did my older brother and our mate, never had any issues So did I....no issues.....I couldn't find my actual manual ones at the time....thought fvck it, use the auto ones....plenty long enough.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| mitchell g |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: Okay? So do i get longer bolts or use the auto ones lol? How long do they need to be if i need to get new ones, cheers i used my auto bolts in my manual, so did my older brother and our mate, never had any issues So did I....no issues.....I couldn't find my actual manual ones at the time....thought fvck it, use the auto ones....plenty long enough. From memory they're an m10 and a m10 only needs 10mm of thread to be as strong as it can which would be about right For the size of the bolt and the thickness of the fly wheel |
||
| Top | |
||
| bry40l |
|
|||
|
I only used manual ones because I had them. But auto ones will work fine.
_________________ BF XR6 |
|||
| Top | |
|||
| Falcon96XR6 |
|
|||
|
Okay, thank you everyone for your replies, helped me out greatly, cheers (:
_________________ EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 37 guests |
