|
| jagga |
|
||
|
Hi guys, i am tryint to work out whats up with my xe. Its a 351c backed with a fmx.
So basically i spun her up exiting a corner rpm is at about 5700rpm change to second manually so i can get more out of The gears, rpm is now at 3500 2nd gear all of a sudden rpm spikes to 6500+ and have to limp home in first with minimal gear gripping for 40kms. Any idea whats going on. Just spoke to my brother where the car is and now its a bit cooler he seems to be gripping the gear. Quite a headache, any advice.
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
| Top | |
||
| Gab1 |
|
|||
|
Torque converter.
Gab |
|||
| Top | |
|||
| rustyeb1991 |
|
||
|
strengthened c4, i never blew mine up and i gave it a real hard life.
|
||
| Top | |
||
| Troy |
|
||
|
fmx's are pretty strong, so i would say its the torque converter
|
||
| Top | |
||
| jagga |
|
||
|
My brother started driving it to my place and he said he was driving it ok untill it warmed up then he lost the gears again.
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
| Top | |
||
| ToranaGuy |
|
|||
|
Do a full oil change, ie not just a pan change, get as much of the old oil out as possible, you probably fried it, and when it get's hot it's not allowing the torque converter to do what it should. Remember, they are a turbine spun by the engine and rely on good oil of the right viscosity to do their job without slipping.
Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|{DESCRIPTION}|{DESCRIPTION}|{DESCRIPTION}| |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 46 guests |
