|
| 67RCE |
|
||
|
snap0964 wrote: 67RCE wrote: B Bear wrote: Well to be honest I'm not entirely sure perhaps I should take it to the local tyre factory and get them to check it ? NO. Go to a suspension specialist! Tyre shop wheel alignments are hopeless in 99% of cases! B Bear wrote: Oh really 67RCE??? I will have to investigate on some places in my area that can do so... I tend to agree with this - a tyre place is probably okay for check alignments, but major changes like springs, etc is better with a specialist - plus they'll be able to advise you. I've had alignments done with the local Bob Jane - it's usually a toe in/out adjustment, as they 'don't have' the shims to adjust castor/camber, 'we do have them on order' - my count on this has been 18mths - 2 yrs. I do write down castor/camber specs beforehand, and luckily they are usually within spec. The aligners I've talked to have no idea on the Falcon SLALS suspension - they just look at the settings on the computer. I'm not sure if this is typical of tyre outlets, but it is my experience. Agree also with checking alignment with the factory upper suspension arm pivots - unless someone can advise definitely that you need aftermarket items. The bolded section is how they knock out 4-5 "alignments" an hour! they are Toe and Go.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| snap0964 |
|
|||
|
67RCE wrote: The bolded section is how they knock out 4-5 "alignments" an hour! they are Toe and Go. Yep, boy are they fast. 'Did you print out a copy of the final settings' 'Nah, did you want them ??'
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
I usually get alignments done at Pedders, whenever I have had them done at Tyre places, they are a toe alignment only, and I always ended up getting the inside edge of the tyres scrub out rather quickly. Since getting alignments at Pedders, no further issues with excessive tyre wear.
I have a camber kit in my EB Ghia, which is a shim type, due for replacement soon. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| B Bear |
|
|||
|
Thanks for the help so far guys !
At the moment I will get the car checked out with its alignment and camber then will decide if I do need a kit or not... |
|||
| Top | |
|||
| 87SIlude |
|
||
|
You shouldn't need one. If you do id be checkingg your front end bushes and ball joints/ tie rods/ rack ends to makesure the problem isn't there.
|
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
if you lower it far enough. the factory bolts won't be long enough, thus not giving enough adjustment and you'll still scrub out tyres
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| B Bear |
|
|||
|
Ok guys so today I went and had a front end alignment on the car done and this is what I got back for the camber angles.....
-1.3° (Left side) -1.65° (Right side) Camber for all vehicles except xr6's is -0.5° to 0° (Max variation L to R is 1°) The xr6's are -1.75° to -0.75° ( Max variation L to R is 0.75° ) I am currently running a set of Super Low springs on the front with standard shock absorbers and 18" rims with tyres profiles of 235/40/18... here is the question would I now use the xr6 camber angles as my guide - and if so I am ok. Or do I really need to fit a camber kit. The alignment place said if I was to fit a camber kit I would need to get the front guards lipped as well. |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
Last time I had an alignment done I was setup to be @ Xr6 specs, as I was running on lows at the time, with short stroke shocks. Now I'm on ultralows I really need to get a new alignment, as it's got more neg camber than I'd like atm, but it stays in a straight line pretty good.... lol.
Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| 67RCE |
|
||
|
For a street car, I'd like to see camber angles down around -1° to 1.25°. That said, I run more camber than that myself, I sit with about -2° front and -3.5° rear. This is because I really don't care about tyre wear, and my car does get driven enthusiatically.
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 18 guests |
