|
| vrblou02 |
|
|||
|
hey folks
looking at converting my ed v8 fairmont to manual in the next few months i have an ea wagon 5 speed complete car here but its cpi what can i use from this i gather i need to get a v8 belhousing but can i use the peddle box from the wagon? what else can i use or is most of it useless please help what other parts such as cables an what not are different in the manuals from 6 to 8 besides the box and bellhousing i no i can use a 6 box as i think barnacus did but just get the shaft changed is that is on the box? cheers folks Drifty
_________________ THE V8 OUTLAW |
|||
| Top | |
|||
| TROYMAN |
|
||
|
you will need the v8 flywheel.clutch assembly,throwout arm,bellhousing and clutch cable.
you will also need to get the gearbox input shaft modified as afaik the v8 input shaft is longer. unless places like dellow or castlemain rod shop make v8 bellhousings to suit 6 cyl boxes.. |
||
| Top | |
||
| vrblou02 |
|
|||
|
chers troy
but what can iuse from the wagon?
_________________ THE V8 OUTLAW |
|||
| Top | |
|||
| BenJ |
|
||
|
Nothing as per factory without modification.
The T5 can be used only if you mod/extend the input shaft. Apart from that, maybe the crossmember, but you can use your auto one too. BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| vrblou02 |
|
|||
|
cheers benj
but i seen somewhere last night that i will have problems with the shaft i thought they would all bolt up the same an 8 shaft im pretty sure will bolt up 2 a 6 box wont it  and yes i suppose i could use my crossmember but do they all mount up the same on the 6 boxes cheers folks Drifty
_________________ THE V8 OUTLAW |
|||
| Top | |
|||
| BenJ |
|
||
|
Am not sure if you can put an 8 shaft in a 6 T5. More knowledgeable individuals will have to answer that one. Finding one would be a challenge in itself. You would also have to source an V8 bellhousing to suit the longer input shaft.
I am pretty sure a V8 crossmembet is the same as a six, as the tail shafts are the same length. I used to have an alloy XR8 tailshaft in my red EB. BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| vrblou02 |
|
|||
|
thanks benj
that expalins alot and tells me what i need to no so shaft will be fine then and any idea on what a dellow bellhousing aka v8 manual houising is worth i think castlemaine would be the best bet yea? cheers oh and no i wasnt being a smart a** jsut to any1 b4 they ask was sincere thanks to benj an every1 else who has helped  Drifty
_________________ THE V8 OUTLAW |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 46 guests |
