|
| louie0408 |
|
||
Age: 36 Posts: 122 Joined: 21st May 2010 Ride: 1997 EL Ford Fairmont Ghia Location: Brisbane |
ok so i finally got the cash together to get my gearbox replaced in my 97 EL ghia. I bought a second hand box from a forum member a month ago which has been sitting at my mechanics workshop waiting for me to have the dough to get it in, which i finally do!
Its from a 94 falcon and it has a dipstick (s**t). What other parts do i need to source for the replacement? Im on the hunt for a torque converter as we speak, but do i need to change speedo gear or anything else to suit the el ghia? PS anyone know a good place to get a torque converter in brisbane? |
||
| Top | |
||
| Benny D |
|
|||
|
if you have the sipstik itself then use it on the gearbox. they are handy little buggers.
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| louie0408 |
|
||
Age: 36 Posts: 122 Joined: 21st May 2010 Ride: 1997 EL Ford Fairmont Ghia Location: Brisbane |
{USERNAME} wrote: if you have the sipstik itself then use it on the gearbox. they are handy little buggers. yeh i meant to say "s**t yeh". Im stoaked to have one. but do i need to chnage over the speedo sender or anything? as the box came out of a falcon and the ghia has a different diff ratio. Or do i have it all wrong? |
||
| Top | |
||
| Benny D |
|
|||
|
i dunno. have a look at the diff to see if they are different ratios. if not will be all good.
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| bry40l |
|
|||
|
while both boxes are out swap the speedo gears just to be sure they are the same as it is alot easier to do while out of the car, altho it can be changed with the box in the car its a little bit of a f**k around
_________________ BF XR6 |
|||
| Top | |
|||
| SWC |
|
||
|
Why do you need another Torque convertor? Why can't you use your current one? How many km on the new box?
As bry40l said, change over you speedo gear while the box is out, the Ghia will be fitted with a 3:45 LSD and the GLi would have had a 3:08 diff, so if you use the sent currently in the new box the speedo will be out. Keep the dipstick as it will be worth is as you will be able to check your trans fluid level whenever you want. If you are using stock exhaust and heatshield, you might need to mod the heatshield for the dipstick if I remember rightly or is that the AU shiled  or grab a EF one.Probably a good idea to get the box flushed and a new filter kit fitted and check the rear oil seal. Also flush your cooler lines and fit a Trans cooler if you don't have one. Good idea to change you rear main oil seal on your engine while the box is out, for the sake of $10.00 it's good insurance. Nothing worse than doing the box and then 6 weeks later the seal starts leaking. |
||
| Top | |
||
| louie0408 |
|
||
Age: 36 Posts: 122 Joined: 21st May 2010 Ride: 1997 EL Ford Fairmont Ghia Location: Brisbane |
I'm doing the converter as well because of suspisions it is on the way out (vibrations at lockup). I also figure it's worth putting in a reco one while the box is out for peace of mind and to keep further maintenance costs down. The new box has 230,000kms on it (same as my car), has been serviced very regularly, and the previous owner of it had it for 10 years prior.
It is being serviced with a new kit and flushed as well. Mt car runs pretty cool as is so I'm not too worried about getting a separate cooler as long as it's serviced regularly. With the speedo gear, should I be getting a new one, or just swapping them over from original box to the new one? |
||
| Top | |
||
| bry40l |
|
|||
|
this is a video of another bloke changing it on an el while the box is in the car:{DESCRIPTION}
_________________ BF XR6 |
|||
| Top | |
|||
| Benny D |
|
|||
|
yea good point chnge the speedo gear while both boxes are out.
And SWC is dead right! for the sake of a few bux take the flywheel off and change the rear main seal.
_________________ BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%. |
|||
| Top | |
|||
| bry40l |
|
|||
|
{USERNAME} wrote: yea good point chnge the speedo gear while both boxes are out. And SWC is dead right! for the sake of a few bux take the flywheel off and change the rear main seal. yep also change the rear main seal as it will be an a** hole to do if it blows out a few months after you put the box in and it has to come out again
_________________ BF XR6 |
|||
| Top | |
|||
| louie0408 |
|
||
Age: 36 Posts: 122 Joined: 21st May 2010 Ride: 1997 EL Ford Fairmont Ghia Location: Brisbane |
ok rear main seal on list to do. I think its leaking anyway. I have lost about 1L of oil each time i do a servoce and have noticed a slick on the bell housing. Sound about right?
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 40 guests |
