|
| low ghia |
|
|||
|
ok...
ive lost my spec sheet and cos the 1636 STILL aint on the friggin wade cams site i need the specs.. gotta take the spec sheet to the guys making up the high stall in malaga ... they need the spec sheet to match it up .. also- anyone one here had a e series btr auto with a high stall?? i had a high stall in 1989 in my xb but that was with the fmx auto... i wanna know what the btr's handle a stallie like.... ive heard not too flash but i tend to believe very little unless someones either older than most of you or has had s**t of car experience (modding ). ive already fitted a tranny cooler to run with a stallie and the adjustable shift modulator is well - turned down most of the time.. anyone got a wade 1636 spec sheet they can scan and either post up or email me.. thanx
_________________
|
|||
| Top | |
|||
| mrnasty |
|
|||
|
IIRC datamine had a stallie going in his EL I6,
EFBIGNIK also has one although he seems to have dissapeared, havnt seen any posts from him in a while
_________________ Cougar Zero makes my pants fit nice. |
|||
| Top | |
|||
| ixlrate |
|
|||
|
|
|||
| Top | |
|||
| green machine |
|
|||
|
ask brett he has one in his 5 litre (terroist ghia) plus one's going in mine very soon!
_________________ custom airbox,custom intake |
|||
| Top | |
|||
| HP hungry |
|
||
|
I had the JMM 3000stall in my BTR seemed to work ok till the brand new box s**t itself with large pwr trans cooler
|
||
| Top | |
||
| rushed |
|
|||
|
bignick has one, keeps hitting limphome mode, cos it revs up to high.
so be carefull of that. i had the 1636 sheet around here but cant find it. |
|||
| Top | |
|||
| Wade Cams |
|
|||
Age: 71 Posts: 565 Joined: 8th Nov 2004 Ride: 2011 Kia Optima Platinum Location: Melbourne |
{USERNAME} wrote: ok...
ive lost my spec sheet and cos the 1636 STILL aint on the friggin wade cams site i need the specs.. gotta take the spec sheet to the guys making up the high stall in malaga ... they need the spec sheet to match it up .. also- anyone one here had a e series btr auto with a high stall?? i had a high stall in 1989 in my xb but that was with the fmx auto... i wanna know what the btr's handle a stallie like.... ive heard not too flash but i tend to believe very little unless someones either older than most of you or has had s**t of car experience (modding ). ive already fitted a tranny cooler to run with a stallie and the adjustable shift modulator is well - turned down most of the time.. anyone got a wade 1636 spec sheet they can scan and either post up or email me.. thanx If you'd care to advise me of your email address, I'll send you the specs for the 1636. It should be on the "friggin"  website, my apologies, l will endeavour to rectify the situation.
Chris WADE CAMS |
|||
| Top | |
|||
| stockstandard |
|
|||
|
The specs Chris posted will be more than enough to pick a stall: http://www.fordmods.com/forums/viewtopic.php?t=13674
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| TerroristGHIA |
|
|||
|
Make sure it isn't set for any more than 2700rpm, otherwise there will be limp home issues.
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| low ghia |
|
|||
|
thanx for the info guys...
i got the 1636 last sept and it the specs wernt on the site then either... i chose it over the phone.. again- thanx for info guys.. i was lookin at 2400 rpm stallie by the way cos i know bout the limp home issues..
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 25 guests |
