Fordmods Logo

kaput? 

 

Page 1 of 2 [ 20 posts ] Go to page 1, 2  Next

 
 Post subject: kaput?
Posted: Wed Apr 26, 2006 2:29 am 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

hey ever since i got my EL everytime i would turn a certain corner with a certain amount of degree on the steering wheel. the car would automatically pull further to the direction im driving. so if a car was next to me on my left while im turning left on a double lane road i would probably hit the fella like i wanted to ram the guy off the road.

im not sure if its because of the road or my tyres. but everytime i turn it would pull itself towards the same direction and i have to correct it by pulling the steering wheel in the opposite direction.

whats up with it? and after a wheel "alignment", the steering wheel is angled when im driving straight.

phong =P~

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
Posted: Wed Apr 26, 2006 10:06 am 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

does it have that speed sensitive steering?
Top
 Profile  
 
 
Posted: Wed Apr 26, 2006 11:42 am 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

could be a badly worn wheel?

bad wheel alignment
or some worn ball joints

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Wed Apr 26, 2006 11:56 am 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 4323

Joined: 17th Jan 2006

Ride: Soarer 2.5GT-T

Location: Cranbourne
VIC, Australia

yeah they f**k your alignment. u need a full balance and aligment...
could be a f**k wheel or steering rack or something
Top
 Profile  
 
 
Posted: Wed Apr 26, 2006 12:08 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

{USERNAME} wrote:
does it have that speed sensitive steering?


im not sure if my car has it :S but not sure what that is either.

and no not badly worn tyre since i just bought the rim and tyre package.

ball joints seemed new when i looked at them while it was jacked up. they were orange in colour and had no cracks on them.

might need to check the rack and pinion.

i think i might give it to someone else for a wheel alignment and see what they say.

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
Posted: Wed Apr 26, 2006 3:01 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

go to a decent/reputable suspension joint and ask for a full front end inspection and a wheel alignment

the wheel bearing could be a little loos..

i go to WA suspension for my wheel alingments $70 a pop but the best the car has ever had!

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Wed Apr 26, 2006 9:45 pm 
Tyre Shredder
Offline
User avatar

Posts: 300

Joined: 5th Apr 2005

Gallery: 10 images

Ride: EF II Fairmont Ghia

Location: Bowral
NSW, Australia

I had that issue when my bearings had shat themselves, happened more when I was going down the freeway.

 

_________________

Current Rides:
VX SS Commodore

EF II Fairmont Ghia, stock as a rock.

Top
 Profile  
 
 
Posted: Thu Apr 27, 2006 2:36 am 
Getting Side Ways
Offline

Age: 73

Posts: 2542

Joined: 18th Mar 2006

Ride: EF-XR8chaser

Location: wollongong
NSW, Australia

{USERNAME} wrote:
go to a decent/reputable suspension joint and ask for a full front end inspection and a wheel alignment

the wheel bearing could be a little loos..

i go to WA suspension for my wheel alingments $70 a pop but the best the car has ever had!
what he said,also ask for a print out of the settings of the wheel alignment,you can compare to fords specs in manuals. i can talk to my boys while doing it and talk about problems or settings,while i inspect under the car,its low and cant see normally,and i get print out to check the next one,you can see which parts are worn out. :roll: :roll:

 

_________________

R.I.P HANS HARTMAN

Top
 Profile  
 
 
Posted: Thu Apr 27, 2006 3:46 am 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

cheers everyone. ill take it down to a tyre fitter or suspension specialist like pedders see what they say. cheers

phong =P~

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
Posted: Thu Apr 27, 2006 3:59 am 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 1953

Joined: 1st Feb 2006

Gallery: 25 images

Ride: BA on gas. EL on gas. XF on gas.

Location: Greenacres/Adelaide
SA, Australia

Post the settings or printout. I can tell you if it good or not.

 

_________________

Member Number 8804
Image

Top
 Profile  
 
 
Posted: Thu Apr 27, 2006 11:19 am 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

ill see if i can find the latest one and show u. and when i get the time to take the car to the specialist ill post that one up too.

phong =P~

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
Posted: Thu May 04, 2006 1:26 am 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

hey fellas. while driving i found something else out. u all know that when i turn to the left at a certain angle causes my car to turn automatically further to the left. now when i turn the steering back to go straight the steering wheel seems to be aligned well and the steering wheel aint angled. but after a few seconds the car pulls itself to the right and i have to turn slightly to the left to keep the car straight again. anyone got any ideas? i havent had the time to go to some tyre specialist or some steering dude.

cheers

phong =P~

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
Posted: Thu May 04, 2006 2:02 am 
Technical Contributor
Offline
User avatar

Age: 60

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia

Does your steering feel like it has a bit of freeplay as well ?
Check out the steering intermediate shaft - one or both of the uni joints could be badly worn.

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion

Top
 Profile  
 
 
Posted: Thu May 04, 2006 7:09 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

cools ill check it once i get time. cheers

phong =P~

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
Posted: Thu May 04, 2006 9:18 pm 
Getting Side Ways
Offline

Age: 42

Posts: 517

Joined: 3rd Dec 2004

Ride: SZ Titanium & ZG Fairlane

Location: Roxby Downs
SA, Australia

Had similar problem with my XR, the alignment would just keep on moving out of place causing heaps of problems. I got it aligned once and drove around the block and wasn't happy and went straight back as the wheel wasn't straight when going straight. They had set it to toe in but with me just going around the block and back it had moved to toeing out. It ended up being the nolathane bushes were stuffed in both lower control arms (think that's what its called) in the front end got them replaced with noltec ones and its all fine now.

 

_________________

Image
F6 Rspec #139 - Stock Car Racing

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 20 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: Google Adsense [Bot] and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Dec 27, 2024 1:54 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names