|
| Froudey |
|
||
|
I am pretty sure this has been covered just didn't search as I now it depends. I have a 2000 AUII and the pipe that bolts into the back of the P/S pump leaks slighly onto the alternator. I think that I have read in benj's thread regarding fixing it.
any ideas or procedures
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Or you could do what i did, go to a fitting place like Earls/Enzed/Pirtek and get a custom hose made. It replaces the factory bolt/plug combo with a decent fitting. Cost me 130 from Earls. I replaced the whole hose from the rack to the pump on the HP side.
Cheers Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| scotty2611 |
|
|||
|
From Memory the hose is sealed by a small o'ring, its a common leak and easy to repair,,, we normally go a slightly thicker o'ring to take some up some of the crush in the pipe if its been over tightened
Scotty
_________________ EB 2,Turbo EL Motor, Momo Wheel, Cam, Fuel preasure reg, LSD, Color coded boot garnish 17" wheels, Lowered, Shift kit, Slotted & cross Drilled Brakes, AU fuel injectors, & more to come |
|||
| Top | |
|||
| Froudey |
|
||
|
scotty2611 wrote: From Memory the hose is sealed by a small o'ring, its a common leak and easy to repair,,, we normally go a slightly thicker o'ring to take some up some of the crush in the pipe if its been over tightened Scotty explain the thicker o-ring? I need to read Benj's thread cause I am sure he over came this
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| scotty2611 |
|
|||
|
I cant remember the size or the original, say its 2mm thick, you cna put one in thats 2.5mm or 3mm thick,
Thats all, its the thickness of the seal,
_________________ EB 2,Turbo EL Motor, Momo Wheel, Cam, Fuel preasure reg, LSD, Color coded boot garnish 17" wheels, Lowered, Shift kit, Slotted & cross Drilled Brakes, AU fuel injectors, & more to come |
|||
| Top | |
|||
| Froudey |
|
||
|
I replaced the O ring that gets ends up in the pump and still small leak. I spoke to a specialist today and he said that he can make a line that pisses the swivel off and just a simple straight pipe for 70 bucks. I think I will go this route before putting new alternator in
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 78 guests |
