Fordmods Logo

Home » Forums » Fordmods Tech » Gearbox, Suspension, Brake & Driveline Workshop

Machining stub axles- BUDGET BIG BRAKE BUILD . BRAKES ON 

 

Page 35 of 41 [ 603 posts ] Go to page Previous  1 ... 32, 33, 34, 35, 36, 37, 38 ... 41  Next

Post New Topic Post Reply  Previous topic Next topic
 
TURBO_GHIA
 Post subject: Re: Machining stub axles- BUDGET BIG BRAKE BUILD . BRAKES ON
Posted: Sat Aug 11, 2012 8:19 am 
Getting Side Ways
Offline
User avatar

Age: 41

Posts: 2637

Joined: 5th Nov 2004

Ride: EL TURBO GHIA

Power: 372 rwkw

Location: penrith
NSW, Australia
Why go to all that effort to run a standard rotor .waste of time

 

_________________

HMMMM BOOST !!!


ED fairmont R.I.P

STREET FORDS FEATURE CAR ISSUE 42
Top
 Profile  
 
 
OMY-747
 Post subject: Re: Machining stub axles- BUDGET BIG BRAKE BUILD . BRAKES ON
Posted: Sat Aug 11, 2012 8:22 am 
Fordmods Newbie
Offline

Posts: 11

Joined: 24th Nov 2007
Cause I want to leave my 15's on. And the standard au2 brakes are the biggest you can fit in a 15, plus it's still getting larger rotor's and twin piston calipers over single piston.
Top
 Profile  
 
 
TROYMAN
 Post subject: Re: Machining stub axles- BUDGET BIG BRAKE BUILD . BRAKES ON
Posted: Sat Aug 11, 2012 8:34 am 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia
OMY-747 wrote:
Cause I want to leave my 15's on. And the standard au2 brakes are the biggest you can fit in a 15, plus it's still getting larger rotor's and twin piston calipers over single piston.


not quite, the std au rotor is the same diameter as e series(287mm), it just has twin piston calipers.
Top
 Profile  
 
 
TURBO_GHIA
 Post subject: Re: Machining stub axles- BUDGET BIG BRAKE BUILD . BRAKES ON
Posted: Sat Aug 11, 2012 8:39 am 
Getting Side Ways
Offline
User avatar

Age: 41

Posts: 2637

Joined: 5th Nov 2004

Ride: EL TURBO GHIA

Power: 372 rwkw

Location: penrith
NSW, Australia
And I think you will find that if you go back thought this thread corey tried to fit a 15 or 16 inch wheel on and they didn't fit

 

_________________

HMMMM BOOST !!!


ED fairmont R.I.P

STREET FORDS FEATURE CAR ISSUE 42
Top
 Profile  
 
 
OMY-747
 Post subject: Re: Machining stub axles- BUDGET BIG BRAKE BUILD . BRAKES ON
Posted: Sat Aug 11, 2012 8:40 am 
Fordmods Newbie
Offline

Posts: 11

Joined: 24th Nov 2007
Really? I thought they were 297mm and I also thought the e series were smaller, mind you I never looked into it just assumed lol. In that case, yeah no point in upgrading anything except maybe the caliper alone.
Top
 Profile  
 
 
OMY-747
 Post subject: Re: Machining stub axles- BUDGET BIG BRAKE BUILD . BRAKES ON
Posted: Sat Aug 11, 2012 8:41 am 
Fordmods Newbie
Offline

Posts: 11

Joined: 24th Nov 2007
TURBO_GHIA wrote:
And I think you will find that if you go back thought this thread corey tried to fit a 15 or 16 inch wheel on and they didn't fit



That would of been over the 330mm brakes though. I'd rather stick to 15's then have big brakes, but I'm weird like that :)
Top
 Profile  
 
 
ef_falcon_95
 Post subject: Re: Machining stub axles- BUDGET BIG BRAKE BUILD . BRAKES ON
Posted: Sat Aug 11, 2012 10:00 am 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 3399

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia
I tried to fit on a el xr6 16" rim. I reckon if I grinded the fins flat on the caliper it would fit .
I was only curious to see so I didn't bother making them fit .

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
 
OMY-747
 Post subject: Re: Machining stub axles- BUDGET BIG BRAKE BUILD . BRAKES ON
Posted: Sat Aug 11, 2012 10:33 am 
Fordmods Newbie
Offline

Posts: 11

Joined: 24th Nov 2007
Yeah so that would of been over the 330mm brakes. I was only talking about the standard au2 brakes.
Top
 Profile  
 
 
SWC
 Post subject: Re: Machining stub axles- BUDGET BIG BRAKE BUILD . BRAKES ON
Posted: Sat Aug 11, 2012 1:14 pm 
Technical Contributor
Offline

Age: 67

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia
AUII/III use a 16'' wheel so I doubt that a 15" wheel will clear. AU alloys had the clearance for the larger calipers.
Top
 Profile  
 
 
OMY-747
 Post subject: Re: Machining stub axles- BUDGET BIG BRAKE BUILD . BRAKES ON
Posted: Sat Aug 11, 2012 1:19 pm 
Fordmods Newbie
Offline

Posts: 11

Joined: 24th Nov 2007
15's fit on ba's even
Top
 Profile  
 
 
SWC
 Post subject: Re: Machining stub axles- BUDGET BIG BRAKE BUILD . BRAKES ON
Posted: Sat Aug 11, 2012 2:23 pm 
Technical Contributor
Offline

Age: 67

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia
Different rim to EF/EL rims.
Top
 Profile  
 
 
OMY-747
 Post subject: Re: Machining stub axles- BUDGET BIG BRAKE BUILD . BRAKES ON
Posted: Sat Aug 11, 2012 2:25 pm 
Fordmods Newbie
Offline

Posts: 11

Joined: 24th Nov 2007
I'm talking about e series 15's on ba's
Top
 Profile  
 
 
TURBO_GHIA
 Post subject: Re: Machining stub axles- BUDGET BIG BRAKE BUILD . BRAKES ON
Posted: Sat Aug 11, 2012 4:50 pm 
Getting Side Ways
Offline
User avatar

Age: 41

Posts: 2637

Joined: 5th Nov 2004

Ride: EL TURBO GHIA

Power: 372 rwkw

Location: penrith
NSW, Australia
why would you have e series 15's on a BA?

 

_________________

HMMMM BOOST !!!


ED fairmont R.I.P

STREET FORDS FEATURE CAR ISSUE 42
Top
 Profile  
 
 
OMY-747
 Post subject: Re: Machining stub axles- BUDGET BIG BRAKE BUILD . BRAKES ON
Posted: Sat Aug 11, 2012 4:52 pm 
Fordmods Newbie
Offline

Posts: 11

Joined: 24th Nov 2007
No idea lol. But I've seen it done.
Top
 Profile  
 
 
Matt_jew
 Post subject: Re: Machining stub axles- BUDGET BIG BRAKE BUILD . BRAKES ON
Posted: Sat Aug 11, 2012 9:25 pm 
Getting Side Ways
Offline

Age: 48

Posts: 4604

Joined: 23rd Nov 2006

Gallery: 4 images

Ride: 5.0 AU's and 5.0 Maverick

Power: 139 rwkw

Location: Sydney West
NSW, Australia
OMY-747 wrote:
I'm talking about e series 15's on ba's


Busted a*** taxi being driven by Mohammad?

 

_________________

xr6turnip wrote:
More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around!

Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 35 of 41  [ 603 posts ]  Go to page Previous  1 ... 32, 33, 34, 35, 36, 37, 38 ... 41  Next
Jump to:  

Home » Forums » Fordmods Tech » Gearbox, Suspension, Brake & Driveline Workshop

Who is online

Users browsing this forum: Google Adsense [Bot] and 27 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 15, 2024 8:15 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names