|
| EB91XR6 |
|
|||
|
hey guys
making a diff with a ebs1 diff 28 spline and i have a fairlane lsd center and i have put it ogether and i cant get the short axel in by 20mm just wont go in any one know why this could happen.
_________________ 1976 XC falcon
|
|||
| Top | |
|||
| twase |
|
|||
|
The axle need to pass both the cone and the spider on each side before it seats. You need to spin the axle to align the splines.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| EB91XR6 |
|
|||
|
one side goes in fully and the other sticks out 20mm ate axels different from abs and non lsd and lsd
_________________ 1976 XC falcon
|
|||
| Top | |
|||
| twase |
|
|||
|
The axles are different lengths from side to side but not from E series to E series (ABS or not) I would think. As I said you need to turn the axle in the housing against the force of the LSD while pushing it in.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| EB91XR6 |
|
||||||||
|
this is what it looks like now but im guessing i have to put it in 5th then twist and push till it goes in
hope the pics help as they say 1000words
_________________ 1976 XC falcon
|
||||||||
| Top | |
||||||||
| twase |
|
|||
|
Might need to put some bearing caps on the center if you havent already. Yes stick in reverse and rotate the axle while pushing in.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| EB91XR6 |
|
|||
|
yer took the picks before berring caps are on already but will give twisting it a go now and see how i go
_________________ 1976 XC falcon
|
|||
| Top | |
|||
| EB91XR6 |
|
|||
|
ok tryed turning and pushing and it wont budge, could there be any reason for this
_________________ 1976 XC falcon
|
|||
| Top | |
|||
| twase |
|
|||
|
Well if it is not going then perhaps one of the following:
The spider gear or cone is broken. The spider gear or cone is the wrong spline. The axle is wrong.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| EB91XR6 |
|
|||
|
where would i find the gear cone got any pics
and it is a ABS axel but it it was in the diff it must go back in does that mean the center could be stuffed if it dosnt go back in or could be somthing i have don while changing the crown wheels, is it a easy fix if throw it in the bin fix
_________________ 1976 XC falcon
Last edited by EB91XR6 on Wed Jan 17, 2007 5:22 pm, edited 1 time in total. |
|||
| Top | |
|||
| Krytox |
|
|||
|
yep as Above, looks to me like the LSD cone isn't alligned with the spider gear.
'forcefully tap rotate' the axle a bit and push it in
_________________ Carefree, we may not be number one, but we're up there. Last edited by Krytox on Wed Jan 17, 2007 5:43 pm, edited 1 time in total. |
|||
| Top | |
|||
| EB91XR6 |
|
|||
|
ok the hammer trick worked thanks alot guys now i can start putting it together with my new lsd
_________________ 1976 XC falcon
|
|||
| Top | |
|||
| EB91XR6 |
|
|||
|
thanks guys you have all been a great help
_________________ 1976 XC falcon
|
|||
| Top | |
|||
| twase |
|
|||
|
No worries, did you check backlash and preloads?
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| EB91XR6 |
|
|||
|
how do i put diff oil in as i cant seem to get anything in there that i can pour it into
_________________ 1976 XC falcon
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |
