I'm half way through my auto to manual conversion on my EAII SPAC. Now i've got all the auto trans out including all the torque converter and the rest of the bizzo but now i was just wondering how all the wiring goes together. I know that the round plug from the auto connects to the auto gearbox computer so i don't have to worry bout that. But, on my manual gearbox thats about to go in i have an 8-pin plug and a single pin plug that doesn't connect to anything i've got at the bottom of the auto loom. I do have a 4-pin plug an a 3-pin plug from th existing loom, but neither will go into the manual gearbox loom. nothing goes together. Anybody else had this problem. Please help so i can drive....