Fordmods Logo

Manually seleting gears with BTR 4spd. 

 

Page 1 of 1 [ 7 posts ] 

 
 Post subject: Manually seleting gears with BTR 4spd.
Posted: Wed Nov 05, 2008 5:58 pm 
Getting Side Ways
Offline

Posts: 436

Joined: 20th Jun 2005

Gallery: 1 images

Ride: Gli

Location: melbourne
VIC, Australia

Hey guys got a slight problem with my auto in my LTD 5L. It drives fairly well when it is in D considering it's age 210,000klms, but when selecting gears manually it either A) Won't select them (more so when it's cold) or B) If it does select them it will go down and up gears when when I select them but sometimes it will just fall back into D. Not to sure what it might be, inhibitor switch? buggered auto? any help would be appreciated.
Top
 Profile  
 
 
Posted: Wed Nov 05, 2008 7:53 pm 
Getting Side Ways
Offline

Age: 38

Posts: 3894

Joined: 15th Nov 2004

Gallery: 24 images

Ride: BF MKII V8 Fairmont Ghia

Location: Perth
WA, Australia

the btr will still change gears when you select a gear.
1 give your first only
2 give you first and 2nd
3 gives your first/second and third still changing by itself.

check fluid level also

 

_________________

2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows

Top
 Profile  
 
 
Posted: Wed Nov 05, 2008 8:08 pm 
Getting Side Ways
Offline

Posts: 436

Joined: 20th Jun 2005

Gallery: 1 images

Ride: Gli

Location: melbourne
VIC, Australia

Yer I realise that but when I put it in 1 sometimes it will give me one sometimes it won't and it's the same for 2 and 3. On the off chance it does select a gear when I hold the shifter in 1,2 or 3 it usually slips out of gear. It will occasionally operate perfect but not often.
Top
 Profile  
 
 
Posted: Wed Nov 05, 2008 11:05 pm 
Getting Side Ways
Offline

Age: 49

Posts: 1343

Joined: 14th Dec 2007

Gallery: 1 images

Ride: EL fairmont offroader

Location: seaspray
VIC, Australia

Maybe it's just an adjustment problem. The T-bar controls a horizontal link that connects to a lever on the gearbox. Where these connect adjustment can be made.

I find that placing the T-bar in Park and getting under the car and loosening the nut on the adjuster and making it happy then re-tightening works fine. My manual says to make the adjustment in Drive, but the problem with this is when you loosen the nut the T-bar can drop into 3rd.

 

_________________

wrecking 9/97 EL fairmont sedan burgundy 6cyl auto 270k modBAintake

Top
 Profile  
 
 
Posted: Wed Nov 05, 2008 11:45 pm 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 1775

Joined: 10th Jul 2007

Gallery: 8 images

Ride: BFII Turbo

Power: 253 rwkw

Location: Waurn Ponds
VIC, Australia

definately needs a new filter and fluid. they wont select gears when fluid is low or hot. low fluid gets hotter faster.

get a service done, you wont know how much it perks it up.

 

_________________

enough isn't enough

Top
 Profile  
 
 
Posted: Thu Nov 06, 2008 5:42 pm 
Getting Side Ways
Offline

Posts: 5503

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia

Change the gear position switch on the left side of the gear box. They get old and display the symptoms you are describing. It is held on with two 8mm bolts and has two wiring looms plugged into it.

BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L

Top
 Profile  
 
 
Posted: Thu Nov 06, 2008 6:15 pm 
Getting Side Ways
Offline

Posts: 436

Joined: 20th Jun 2005

Gallery: 1 images

Ride: Gli

Location: melbourne
VIC, Australia

I think you may be on the money BenJ. Gearbox was serviced less than 5,000k's ago when motor and box were out and engine was being rebuilt. Gearbox was doin this before it was pulled out, should have fixed it then but I just thought it was a servicing and or old fluid issue.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 7 posts ] 

Who is online

Users browsing this forum: No registered users and 125 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 15, 2024 11:47 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names