|
| crosby611 |
|
||
|
is it possible to put a mini spool into the diff housing of a standard single spinner for a 95 fairmont
|
||
| Top | |
||
| TROYMAN |
|
||
|
yes!
|
||
| Top | |
||
| crosby611 |
|
||
|
do i just pull the back of the housing off and slot it into place then wallah or is it a bit harder than that if so please explain
|
||
| Top | |
||
| TROYMAN |
|
||
|
no.there is a bit of work..
probably best to get a diff place to do it.. you need to remove both axles remove the rear cover, undo the 4 bolts holding the centre in the housing. take note how the bearings and any spacers are fitted. once the centre is out afaik the ring gear needs to be removed? and the centre needs to be pulled apart and the spool can be fitted.. that just going from memory so there might be a few details i might have forgotten.. |
||
| Top | |
||
| crosby611 |
|
||
|
ahk how many splines are the axles in the standard single spinner so i know what spool to buy
|
||
| Top | |
||
| TROYMAN |
|
||
|
28 spline.
|
||
| Top | |
||
| crosby611 |
|
||
|
is the diff a borgwarner
|
||
| Top | |
||
| TROYMAN |
|
||
|
yep
its a 28 spline borg warner 78 series |
||
| Top | |
||
| crosby611 |
|
||
|
cheers mate been a huge help
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 73 guests |