|
| TaraHymen |
|
|||
|
{USERNAME} wrote: I was under the impression that if you
didn't have lowered suspension, and you have stock rims that you didn't need a Caster/Camber kit. Is all this really needed? back in the late 80's we were fitting camber/castor kits to brand spanking new ea's so there is no rule of thumb. it's sumthing i would recommend to anyone anyway. it gives you the ability to be 100% spot on, not just close.
_________________ <a href="http://www.spyderbyte.com.au">
|
|||
| Top | |
|||
| kwaussiekid |
|
||
|
I did mine myself, apart from wheel alignment, it cost about $800 all up.
_________________ The older I get the better I was! |
||
| Top | |
||
| XPFalcon170 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: $63.00 Urethane Panhard_Rod Bush EP156 Are you sure they're quoting for your car and not someone elses car? Panhard Rods are for Commodores. Falcons have Watts linkages.... This is what concerns me. I am paranoid about being ripped off I have to tell ya. I trust anybody with my car  it is pedders afterall mate, they are the experts in the field of ripoff merchants. You could take a brand new car in there and will say you need this and that and you'll leave with a rather sore sphincter at the end of it. Thats my view of it anyway. My boss did work there for a very short period in the early 90's and i've heard a few bad stories about them.
_________________ 84 4runner.......needs boost |
|||
| Top | |
|||
| GeZza200 |
|
||
|
depends which pedders you go to aswell. There all different and owned by different people. I was asking about sway bars for my car and he was saying dont worry about getting the pedders ones they are only 2mm different and you wont notice it. He gave me a few names and numbers to get good deals with wheels an tyres aswell, so i guess its just upto who its owned by and if they are honest and not trying to rip you off.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| jrfttf |
|
||
|
$2800! you would nearly want a complete car for that money!
|
||
| Top | |
||
| nicco |
|
|||
|
{USERNAME} wrote: Have prices gone up in the suspension business or something? I just got a quote for 4 x KYB AGX and a set of King Springs for my car...$1510 for the lot supplied and that's with a saving of $230...
phong =P~ holy sheezus!! i got kyb shcokers in the back, boge in the front, whiteline springs (much better than kings imo) and whiteline front and rear non adjustable swaybars for about $200 less than that!! admittedly about 2.5 years ago, but goodness me. i'm glad i sucked it up and did it when i did!! Kit, that seems damn excessive. you can get a whole nolathane bush kit from top to toe for the falcs for ~$600 off the net brand spankers. dunno how much fitting on one of them would be worth. |
|||
| Top | |
|||
| Grumblexr6 |
|
||
|
Thats ok I payed $300 for my XF ute and the steering was up to s**t and made me drive all over the road so went for a $14 safty check to and I got a bill for $4500 to fix everything even tho i changed the shocks and other stuff before hand, so went saw my mate who has an Auto shop and got the frontend parts that I needed and all up costed just over $700 and thats someone putting the parts in for me and its fine now.
Pedders only good for the Safty Check other then that they wont be doing my work or getthing them to supply parts either |
||
| Top | |
||
| fordman351 |
|
|||
|
Isn't a complete front and rear bush overhaul kit from Nolathane (which IMO is a better product) available for about $600-$700? I'd check that out first.
|
|||
| Top | |
|||
| fordfreak ef |
|
|||
|
{USERNAME} wrote: what your getting is a complete rehaul i doubt that all that stuff listed is warn or needs to be replaced. Get what has to be replaced, $2800 is a bit silly its nearly half the price of the car. half the price? can pretty much buy online 2nd hand ef monts for that much... 
|
|||
| Top | |
|||
| Steady ED |
|
|||
|
{USERNAME} wrote: Isn't a complete front and rear bush overhaul kit from Nolathane (which IMO is a better product) available for about $600-$700? I'd check that out first.
Yeah supply, theres alot of labour in front end.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| JOSE |
|
|||
|
i had a $2500 quote from pedders, half the stuff they quoted didnt need doing, and the things they said were OK wern't ended up doing it all myself $1000 odd for all new bushes and new shocks.
_________________ Because i can. |
|||
| Top | |
|||
| pugsley |
|
||
|
I got a quote from pedders about a year ago for low springs and new shocks all round. They quoted about 1300 from memory. Then i went to wilkinsons in Bayswater and got it done for around 800.
_________________ EF GLi Wagoon |
||
| Top | |
||
| TROYMAN |
|
||
|
pedders are rip off merchants...
there products arnt that good and they charge you an arm and a leg for a monroe product thats made for them..... |
||
| Top | |
||
| cjh |
|
|||
|
{USERNAME} wrote: The car is an '96 EF Fairmont, 196,000 on the clock. And nothing has been replaced except the front swaybar bushes in that time.
I got Pedders to do the $14/28 point inspection, which they didn't charge me for. $151.00 C/Gas Sealed Strut 8917 Right $151.00 C/Gas Sealed Strut 8917 Left $47.00 Urethane Shock Bush EP4035 $230.00 2 Camber/Caster Kits 5415 $132.00 2 Pedders Ball Joints PBJ292 $128.00 2 Pedders Ball Joints PBJ296 $34.00 Urethane Radius_Rod Bush EP9089 $56.00 Urethane Radius_Rod Bush EP9151 $97.00 Urethane Control_Arm Bush EP6331 $420.00 Power Steering Rack & Pinion 1607 $166.00 2 Comfort Gas Shocks 8057 $20.00 Urethane SwayBar_D Bush EPF22 $34.00 Urethane SwayBar_Link Busk EP950 $108.00 4 Pedders Rubber Bushes 5822 $88.00 4 Pedders Rubber Bushes 5852 $63.00 Urethane Panhard_Rod Bush EP156 $90.00 2 Front Wheel Bearings SUNDRY $10.00 Workshop consumables WORK $784.00 F-Fitting ------------------------- $2809 TOTAL COST They said it will be a new car underneath. A lot of money isn't it. I was under the impression that if you didn't have lowered suspension, and you have stock rims that you didn't need a Caster/Camber kit. Is all this really needed? Go to a mob that sell SuperPro suspension kits. They're way better quality bushes than Nolathane & Pedders put together. I have used both Nolathane and Pedders bushes and have found them to turn to powder. The Pedders heavy duty rubber bushes turn to mush, and they were on the upper trailing arms and no they didn't get oil on them, it was really odd.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Kit |
|
|||
|
Thanks for that. I'll get a 3rd opinion from WA Suspensions after I see Midas.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 22 guests |
