|
| Happy |
|
|||
|
which do people recommend - for standard rotors ?
I may as well put in new bearings and new pads this weekend...
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| Smackdown |
|
|||
|
The greenstuff pads or the bendix advance. Both are great.
Not sure about bearings.
_________________ BA Falcon Futura on EGas. Stock as...
|
|||
| Top | |
|||
| Interceptor |
|
||
|
why are you replacing the bearings? is there an isue with the existing ones?
_________________ Banned |
||
| Top | |
||
| Happy |
|
|||
|
Interceptor wrote: why are you replacing the bearings? is there an isue with the existing ones?
I'm putting abs rotors on and want to put on new bearings at the same time.
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| Disco Frank |
|
|||
|
just get the ford bearings or a good set from a reputable autostore
pads on standar rotors go for bendix advance
_________________ RIP SCOTT |
|||
| Top | |
|||
| msman |
|
||
|
skf bearings are good their in the el now.
been told ntn are s**t but have had no trouble with them in the ef x-taxi went thru about 3 sets over 900,000. maybe talk to one of the bearing jonts. and then see what repco bursons recommend. remember hub seals.
_________________ why do u write in here. |
||
| Top | |
||
| twase |
|
|||
|
Happy wrote: quote]
I'm putting abs rotors on and want to put on new bearings at the same time. Happy, not that you asked for installation advice, but some observations when I did mine. Carefull if they are new, I went thru 3 sets of bearings before I found casting sand still inside one rotor, give them a good clean before you put the bearings in. An obvious point to some but change the inner cones as well, some suppliers say its OK to leave the inners in. Maybe OK if the inner and outer are the same brand but its safer to change them. Last point, make sure the cones are all the way home not just flush with the hub. Cheers TW.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| joolz |
|
|||
|
get the original ford bearings (timken) with new seal. With the pads id go bendix advance. Make sure you use hi temp grease on the bearings and renew the split pins.
|
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
Bendix Advance if you want black wheels from all the dust..
EBC Green Stuff.. bite a bit harder and are not as dusty. put some good dot 5 fluid in the brake system, you can slam em all day and still have a firm pedal.. by slamming I mean on a race track style slamming.. oh yeah they work fantastic on the road too used both brands EBC by far.
_________________
|
|||
| Top | |
|||
| Nicko |
|
|||
|
greg
im extremely happy with teh ebc green stuff pads infact im on my second set now!
_________________ Nicko |
|||
| Top | |
|||
| Nicko |
|
|||
|
oh yeah speak to cam at hightek he will look after you!
_________________ Nicko |
|||
| Top | |
|||
| tomcolahan |
|
|||
|
Neo_nick wrote: oh yeah speak to cam at hightek he will look after you!
For anyone in Vic, tke Nick's advice and speak to Cam. Can't praise them enough. Oh, and go the EBC greenstuffs if you want to spend the money. If you are after a cheaper pad, look at the axxis range. Made by Bendix, reccommended to me by Cam when we were trying to chase my brake shudder problems and throwing out pads every 6000kms. They were as good as any other pad I have used bar the Greenstuffs, including Bendix advance & ultimates.
_________________ We'll keep our cow s**t in the country, you keep your bull s**t in the city. |
|||
| Top | |
|||
| Timmeh |
|
||
|
Get some slotted rotors Greg and get some greenstuff pads.
|
||
| Top | |
||
| Steady ED |
|
|||
|
dc_todd wrote: Bendix Advance if you want black wheels from all the dust..
I was waiting for the Bendix hating from somewhere 
I have to agree with the dust comment. I'm yet to try a set of EBC Greenstuffs (next pad change), but the Ultimates are dusty as f**k. They do bite nicely though, and I like the feel they provide.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 106 guests |
