|
| XeTurbo |
|
|||
|
i was just wondering what the offset measurement was for a pre AU ford
|
|||
| Top | |
|||
| distortion |
|
|||
|
14.3 from memory
_________________ Team Cant Stop the Doof Doof
|
|||
| Top | |
|||
| XeTurbo |
|
|||
|
i was just trying to find out the difference between AU wheels and pre AU wheels, like do AU wheels sit in further, or sit out further, and what the measurements for it? i think you were saying the stud spacing which is 114.3 or something?
|
|||
| Top | |
|||
| fairmont1998 |
|
|||
|
If you put AU wheels on a pre AU they will sit in further. Fouls on the suspension on the front.
_________________ 2008 WQ Fiesta XR4 |
|||
| Top | |
|||
| XeTurbo |
|
|||
|
cool, just wondering thats all as i have a AU stocko and it fits on the front easily enough (on the XE) it just sits in heaps far
|
|||
| Top | |
|||
| Dellboy999 |
|
|||
|
5 x 114.3 is the PDC the offset pre AU is +6, AU onwards is 5 x 114.3 PDC and offset of +35
_________________ Full working BA Shifter now upgraded to BF Shifter. |
|||
| Top | |
|||
| JOSE |
|
|||
|
i thought is was +10 and +38 ?
_________________ Because i can. |
|||
| Top | |
|||
| ndroo |
|
||
|
so having said this its quiet possible to have EL wheels on an AU? just they will stick out too much...cos i know the stud patten is the same.
|
||
| Top | |
||
| JOSE |
|
|||
|
yeh, there is an AU up at the uni with a set of ELGT rims on it, it looks good though, they dont stick out past the gaurds either, the main problem with AU/BA rims on a pre AU falcon is that the tyres will rub on the front suspension
_________________ Because i can. |
|||
| Top | |
|||
| XeTurbo |
|
|||
|
yeah thats what i thought
|
|||
| Top | |
|||
| reaper_falcon |
|
||
|
I spose wheel spacers would be able to fix this problem?
|
||
| Top | |
||
| TROYMAN |
|
||
|
35mm hub adaptors is whats needed, and its not just the tyre that hits, its the rim aswell...
|
||
| Top | |
||
| brandon89 |
|
||
|
Sow how does this +6 offset measure up in terms of inches of BS (backspacing?), I was checking out some wheels on VPW and the 3 offset options are 3.5", 4" and 4.5"... Am I reading something wrong: 15X8 5-114.3 PCD/4" BS
http://www.vpw.com.au/productgroup.asp? ... GrpID=4658 |
||
| Top | |
||
| MAD |
|
|||
|
Offset is the distance fron the centreline of the wheel to the hub mating surface.
Backspacing is the distance from the hub mating surface to the inner edge of the rim. 
|
|||
| Top | |
|||
| brandon89 |
|
||
|
Ok sweet... So after some further reading 4.5" of backspace on an 8" rim is 0 offset (4.5 due to the bead not being included in rim width, but being included on backspace). Just taking a stab in the dark that a 4" backspacing should do it (might stick out a little but that fine)?
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 40 guests |
