Hi everyone, recently I converted the ford au series2 Ute from auto to manual 5 speed. The conversion also included swapping the computer from auto to manual one...however I got some issues with idle ....base idle is higher than before ....it was on 750_850 rpm before with a little fluttering of 50_100rpm....now its in the 1100rpm same flutter but with occasional revs to 2000 or less at times ..when the gearbox was swapped and computer ..I don't think it was reset with a battery disconnect or fuse 20 removal..to relearn...took advantage of the workshop to replace an error coding knock sensor ....and changed the 02 sensor as well..how do reset the base idle ..how should I relearn the car now its manual ...not auto ....help please . Cheers