|
Mash85 |
|
||
|
heys guys,
yesterday me and steve (dcstraight) were doing my brakes and the screws that holds the rear discs on seem to have seized. any one have any ideas on how to get it off before i go down the road and throw some money at brakes plus
_________________ |
||
Top | |
Disco Frank |
|
|||
|
HEAT!!!
crc the f**k out of em heat em up with oxy and use a impact screw driver!
_________________ RIP SCOTT |
|||
Top | |
joolz |
|
|||
|
I had to use a small cold chisel to get it loose. CRC is only good if it can actually penetrate.
|
|||
Top | |
smoke_ |
|
|||
|
spray some crc on it, get a flat punch as wide as the screw (or slightly smaller), and hit it with a hammer. that will shake it and it should come loose.
i did this with mine.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
Top | |
twr7cx |
|
|||
|
I used an Impact screwdriver, actually, no I didn't, even that didn't work, I took the bit from the impact screw driver and fitted it into my socket, and used a 3/8" ratchet and screwdriver bit on it.
|
|||
Top | |
snap0964 |
|
|||
|
A large phillips head screwdriver with vicegrips on the shaft, or preferably a phillips head bit with ratchet as mentioned - obviously you need the leverage. Be sure to press on your ratchet/screwdriver while turning, so you don't butcher the phillips head screw.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
Top | |
Mash85 |
|
||
|
whats an impact screwdriver?
_________________ |
||
Top | |
creeture3 |
|
||
|
Go to www.transquip.com.au and put in "impact driver" into the search, or look for "KIID 3400".
Every good mechanic should have one. |
||
Top | |
Mash85 |
|
||
|
thanks mate, prices are cheap too if the rrp they qoute is anything to go by
_________________ |
||
Top | |
Who is online |
---|
Users browsing this forum: Google [Bot], Google Adsense [Bot] and 90 guests |