|
| stephen351 |
|
|||
|
hey.... yes im stoopid,,,, and this one has to be a easy one for you guys..
i got to change brake pads on a xd ute... GIFNOK? i think is the brand... how do these a**hole come off.... there are 2 pins with split pins in them, do they come out? there are two metal clips do they come off.. too late already off.... and there are 2 bolts one on the suspension type thing, and one at the bottom end of the bakes which have a split pin, do these come off? Please help fella's i know im dumb etc etc etc...... |
|||
| Top | |
|||
| sickd |
|
|||
|
just get a hammer and a cold chissel and chip away the rust and they should fall right off.
_________________ BA XR8 BOSS 260
|
|||
| Top | |
|||
| stephen351 |
|
|||
|
???? WHAT YOU TALKING ABOUT THERE IS NO RUST?????
|
|||
| Top | |
|||
| sickd |
|
|||
|
soory mate just ahving a dig ...
i apologise there are 2 bolts to undo if you look you will see 2 bolts one at top end of caliper and one at bottom just undo them and caliper will come off they are on the back side of the disc
_________________ BA XR8 BOSS 260
|
|||
| Top | |
|||
| stephen351 |
|
|||
|
THANKS, ITS THE ONE THAT SPLIT PINS GO THROUGH? YOU ARE A CHAMPION!!!!
|
|||
| Top | |
|||
| stephen351 |
|
|||
|
OK GENIUS.....how does a ef speedo just stop working?.... is the thing on the gear box with the cog on it???? has that s**t it self
|
|||
| Top | |
|||
| Interceptor |
|
||
|
{USERNAME} wrote: OK GENIUS.....how does a ef speedo just stop working?.... is the thing on the gear box with the cog on it???? has that s**t it self
possibly the transducer is shot, but it could be the cluster as well.....
_________________ Banned |
||
| Top | |
||
| stephen351 |
|
|||
|
i changed pads..... i bleed the brakes.... but now i have to push right to the floor to get it to stop, maybe it needs more bleeding. or is something f**k. it vered to the right at first, but has stoppped that.
|
|||
| Top | |
|||
| xfnoho |
|
||
|
it requires more bleeding or yes you have
f#@ked somthing. do not drive the car till you have a decent pedal!! if you drained the master cylinder you may have to bleed that and the rear brakes as well!!!!!! |
||
| Top | |
||
| sickd |
|
|||
|
yeah when you bleed the brake make sure the master cylinder is always full or it will suck air
and is the plug to the gear thingy come off the gearbox . is there any power to you cluster does anything else work
_________________ BA XR8 BOSS 260
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 51 guests |
