|
| RuchEa |
|
||
|
Is there a difference in diffs of non ABS equipped EA and ABS equipped EB, other than centres and ratios?
What i mean is, the EF diff is different to EA,EB and ED because of handbrake position, is there a similar difference in the ABS setup? Thanks
_________________ EB XR6 project almost complete!
|
||
| Top | |
||
| Disco Frank |
|
|||
|
the abs use a reluctor ring on the end of the axles for the abs and the axle housing has the abs sensor holes
_________________ RIP SCOTT |
|||
| Top | |
|||
| RuchEa |
|
||
|
Ok Disco, My non ABS diff has just been rebuilt so wanna keep it but I also want ABS off the EB XR6 is it a simple/tricky conversion or is the ABS diff equipped with a different caseing?
Basically can I fit the ABS to my diff?
_________________ EB XR6 project almost complete!
|
||
| Top | |
||
| Disco Frank |
|
|||
|
ahh yes
u just need the axles and complete wiring loom
_________________ RIP SCOTT |
|||
| Top | |
|||
| RuchEa |
|
||
|
sweet all thats all there as I will be fitting my goodies into XR6 body
_________________ EB XR6 project almost complete!
|
||
| Top | |
||
| xf_xr6 |
|
||
|
from experience, i honestly reckon the ABS in early cars (such as eb-ed) is crap! imho, i wouldn't worry going through the hassle of converting it to ABS...
Just to compare, drive an eb/ed with abs, then hop into a later car such as VZ or BA/BF. The difference is just amazing. |
||
| Top | |
||
| samftr |
|
|||
|
what about retrofitting abs from an ef fairmont to an ef gli? if the parts are cheap?
could he use those bits on an ea
_________________ 175.7hp 15.5 @ 374,000km
|
|||
| Top | |
|||
| Happy |
|
|||
|
{USERNAME} wrote: what about retrofitting abs from an ef fairmont to an ef gli? if the parts are cheap?
yeah I did that - easy as!!!
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| Disco Frank |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: what about retrofitting abs from an ef fairmont to an ef gli? if the parts are cheap? yeah I did that - easy as!!! ohh yer it was................... with bent axles!
_________________ RIP SCOTT |
|||
| Top | |
|||
| Happy |
|
|||
|
meh - dodgy suppliers
 nah it was all easy enough really, swap over the loom and brake lines, then just fit everything.
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| RuchEa |
|
||
|
So the general senesis is not to convert?
_________________ EB XR6 project almost complete!
|
||
| Top | |
||
| Sturmovik |
|
|||
|
No, its crap.
_________________ 1993 ED XR6 5speed Polynesian Green. Project car. |
|||
| Top | |
|||
| Happy |
|
|||
|
{USERNAME} wrote: Just to compare, drive an eb/ed with abs, then hop into a later car such as VZ or BA/BF. The difference is just amazing.
how is that even a fair comparison??? Why not compare the efficiency of the air conditioning system in an EA over a BF? Of course the difference will be amazing. ABS in the EF is quite well designed for the EF - if you want to put it in, it isn't hard. I'll help where I can and you can even put some doco together!
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| RuchEa |
|
||
|
Sweet will ask around about the ABS would prefer to have but if its s**t?
Would be happy (no pun) to do a doco, bout time I did something for this site!!! Will pm you when i have pics and info.
_________________ EB XR6 project almost complete!
|
||
| Top | |
||
| Happy |
|
|||
|
no worries man, when you have everything give me a yell, I'll tell you what we need to do, which photo's to take etc and walk you through it!!!
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 37 guests |
