Fordmods Logo

Home » Forums » Fordmods Tech » Gearbox, Suspension, Brake & Driveline Workshop

rev limiter down to 4800?? 

 

Page 1 of 1 [ 8 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
Benny D
 Post subject: rev limiter down to 4800??
Posted: Wed Oct 05, 2011 7:48 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 1507

Joined: 14th Aug 2009

Gallery: 12 images

Ride: BA XT V8

Location: Gosnells, Perth
WA, Australia
hey guys n gals.
since i changed my gearbox on the weekend and put a hi-stall in it i have noticed when trying to let it rev out it will cut at about 4750-4800.?

also in some testing today on a very hard launch it seemd to slip and cut for a secondd while in first at around 3000?

will these issues be fixed when it gets tuned?

 

_________________

BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%.
13.65@102mph. 2800 hi-Stall.
230RWKW@5250 rpm. 625NM.
Top
 Profile  
 
 
chickenman242
 Post subject: Re: rev limiter down to 4800??
Posted: Thu Oct 06, 2011 8:39 am 
Parts Gopher
Offline

Age: 44

Posts: 55

Joined: 4th Sep 2010

Ride: ba xr8 supercharged

Location: perth
WA, Australia
i got a similar prob when my box got rebuilt and got the stall uped to bout 2200 sometimes it jumps from 1st to second on take off and i still got a delay for reverse when warm
prob best to get it checked out/tuned sooner rather than later
Top
 Profile  
 
 
Benny D
 Post subject: Re: rev limiter down to 4800??
Posted: Thu Oct 06, 2011 3:34 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 1507

Joined: 14th Aug 2009

Gallery: 12 images

Ride: BA XT V8

Location: Gosnells, Perth
WA, Australia
ah ok.
yea its already booked for tune 17th at BPT.

hopefully all fixd n stuff.

 

_________________

BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%.
13.65@102mph. 2800 hi-Stall.
230RWKW@5250 rpm. 625NM.
Top
 Profile  
 
 
chickenman242
 Post subject: Re: rev limiter down to 4800??
Posted: Sun Oct 09, 2011 8:41 pm 
Parts Gopher
Offline

Age: 44

Posts: 55

Joined: 4th Sep 2010

Ride: ba xr8 supercharged

Location: perth
WA, Australia
Just tell them what you want the tranny to do and all should be good
Any reason you decieded to use bpt instead of xft
Top
 Profile  
 
 
Benny D
 Post subject: Re: rev limiter down to 4800??
Posted: Sun Oct 09, 2011 8:45 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 1507

Joined: 14th Aug 2009

Gallery: 12 images

Ride: BA XT V8

Location: Gosnells, Perth
WA, Australia
a couple people i know used BPT and wer preety happy with the results.
also BPT was $1200 and XFT was $1600.

and mine isnt a massively specialized tune as its just bolt on gear on it.

 

_________________

BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%.
13.65@102mph. 2800 hi-Stall.
230RWKW@5250 rpm. 625NM.
Top
 Profile  
 
 
chickenman242
 Post subject: Re: rev limiter down to 4800??
Posted: Tue Oct 11, 2011 8:38 am 
Parts Gopher
Offline

Age: 44

Posts: 55

Joined: 4th Sep 2010

Ride: ba xr8 supercharged

Location: perth
WA, Australia
my brother got his el er8 tuned at xft and i gotta say not really happy with the result
plus i went in there to suss them out bout a tune and unless ya gonna spend big dollars they dont wanna know ya
Top
 Profile  
 
 
nicco
 Post subject: Re: rev limiter down to 4800??
Posted: Tue Oct 11, 2011 12:00 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 3186

Joined: 8th Nov 2004

Gallery: 6 images

Ride: EF Falcon

Location: Townsville
QLD, Australia
I think you are talking about your BA as the car this is for?

I had an issue in my EF after I removed the speed sender input to the ECU after a manual conversion where the rev limiter dropped to 4800rpm.

You haven't been playing in around near the ECU with anything have you?

 

_________________

Nicco's M112 Blown, T-56 equipped EF
forums/viewtopic.php?t=68319
Top
 Profile  
 
 
Benny D
 Post subject: Re: rev limiter down to 4800??
Posted: Tue Oct 11, 2011 3:38 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 1507

Joined: 14th Aug 2009

Gallery: 12 images

Ride: BA XT V8

Location: Gosnells, Perth
WA, Australia
Yea the ba. And nope didn't touch any electrics just unplugged the box wires and put them back in the next box.

 

_________________

BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%.
13.65@102mph. 2800 hi-Stall.
230RWKW@5250 rpm. 625NM.
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 8 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » Gearbox, Suspension, Brake & Driveline Workshop

Who is online

Users browsing this forum: No registered users and 37 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Dec 28, 2024 6:32 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names