|
kayronamus |
|
||
|
ive been told an ef 4 speed auto trans will bolt onto an AU xr6 motor if i use the au bell housing, is this true???? If so would it all bolt straight together???, or what else would i need for the operation?????? Cheers for any help............
_________________ kilakiza eauxr6 |
||
Top | |
xpvanman |
|
|||
Age: 58 Posts: 252 Joined: 22nd Mar 2008 Ride: BF F6 Typhoon. XP Van.XF Hearse Location: Newcastle |
Yes - The AU bellhousing will fit on the EF Trans...
|
|||
Top | |
BenJ |
|
||
|
kayronamus wrote: ive been told an ef 4 speed auto trans will bolt onto an AU xr6 motor if i use the au bell housing, is this true???? If so would it all bolt straight together???, or what else would i need for the operation?????? Cheers for any help............ Actually, the E series auto will bolt straight up to the AU engine. The two lower bolt holes do not line up, but there a quite a few guys driving around like this with no issues. I think you will find that trying to change the bellhousing on an Auto is not as straightforward as it sounds. BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
Top | |
^JAsE^ |
|
|||
|
BenJ wrote: kayronamus wrote: ive been told an ef 4 speed auto trans will bolt onto an AU xr6 motor if i use the au bell housing, is this true???? If so would it all bolt straight together???, or what else would i need for the operation?????? Cheers for any help............ Actually, the E series auto will bolt straight up to the AU engine. The two lower bolt holes do not line up, but there a quite a few guys driving around like this with no issues. I think you will find that trying to change the bellhousing on an Auto is not as straightforward as it sounds. BenJ Sorry mate i tend to disagree there as it is very much straight forward. simply pulling out the torque converter undoing the 6 bolts i think there are and reverse the process. You just need a double hex socket for the belhousing bolts and thats it!
_________________ boobies are good |
|||
Top | |
BenJ |
|
||
|
Excellent. Then it is not as hard as I thought it may be. I was not sure.
BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 85 guests |