|
| falcon_3512003 |
|
|||
|
got a 94 ef anyone ever put a stall in one and is there anything to change eg ecu mods ?
_________________ now have a series 1 au starting the mods slowly |
|||
| Top | |
|||
| chooka |
|
||
|
I'm running a 2800rpm stall in my EFXR8 and no need for any mods.
_________________ ----------------------------------------------------
|
||
| Top | |
||
| jagga |
|
||
|
i had a 3000 stally in the ef xr8 and i found i prolly copped a bit of over kill and maybe lost a bit of power.... pick the stally according to ur application... mine is gonna suit the xr8 wen i get her back on the road with the extra power. cant wait
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
| Top | |
||
| jagga |
|
||
|
i had a 3000 stally in the ef xr8 and i found i prolly copped a bit of over kill and maybe lost a bit of power.... pick the stally according to ur application... mine is gonna suit the xr8 wen i get her back on the road with the extra power. cant wait
_________________ Ef xr8. Charged 9psi, tw 170 heads,track heat intakes,1.72 rockers, f303 cam, custom plazma man/ rapid cooler, 60lb injectors, tko600, sct eliminator, aeromotive fuel system. |
||
| Top | |
||
| newby |
|
|||
|
Has anyone one got a stall converter in an 4spd auto, 6 cycl?
I have been warned that fuel economy goes to s**t with these. Can they be switched on and off at the dash?
_________________ Don't bug me unless you have chocolate or a cure for PMT |
|||
| Top | |
|||
| mrnasty |
|
|||
|
newby wrote: Has anyone one got a stall converter in an 4spd auto, 6 cycl?
I have been warned that fuel economy goes to s**t with these. Can they be switched on and off at the dash? IIRC if you have anything over 3000rpm stally it tricks the ECU into limp home mode, so stay under 3000rpm stally and you will be fine. Not to sure about the fuel economy. And no you cant switch them on and off, the stall point is non adjustable and you cant disable it. its there for good!
_________________ Cougar Zero makes my pants fit nice. |
|||
| Top | |
|||
| Tocchi |
|
|||||
|
the hi-stall/torque converter sits in the gearbox bellhousing
|
|||||
| Top | |
|||||
| falcon_3512003 |
|
|||
|
thanks guys wasent shaw if i needed to mod anything in these ecu run cars iv had a stall be for behind a 351 in a xw cheers
_________________ now have a series 1 au starting the mods slowly |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 114 guests |
