|
cjh |
|
|||
|
{USERNAME} wrote: Update: I've checked the feed and I've had my mechanic check the feed of the cable and nothing is visibly wrong. Next time I might get a genuine Ford clutch cable and see if there's a difference in life. Time to check the Gearbox / Clutch plate now me thinks. Genuine cables haven't been available for some time. It helps to have lube on the cable end point, and you made need to go through the whole thing....g'box snout, clutch fork and fork pivot and the 'shoulder bolt', fork insulator, clutch condition, etc.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
Top | |
Mad2 |
|
|||
|
{USERNAME} wrote: Genuine cables haven't been available for some time. It helps to have lube on the cable end point, and you made need to go through the whole thing....g'box snout, clutch fork and fork pivot and the 'shoulder bolt', fork insulator, clutch condition, etc. good thing i still have one cable in its plastic bag |
|||
Top | |
FATT EF |
|
|||
|
Cheers cjh, I'll be making a check list indeed!
|
|||
Top | |
FATT EF |
|
|||
|
Update:
I've just installed an Exedy Standard 6cyl clutch kit and oooh man is it good! Light and smooth, and it's actually shifting better with my short shifter stick. The heavy duty Clutch Industries unit I had was freakin' heavy and started hurting my knee joint. I can already tell my clutch cable is going to go the distance now. Cheers |
|||
Top | |
FATT EF |
|
|||
|
Well here I am again...
This cable has lasted 8 months...gives me the sh**s... At least I can feel it before it happens now. Clutch pull starts feeling lighter and more slack until it "pops". Makes me feel like converting back to flamin' automatic (shudder). |
|||
Top | |
Mad2 |
|
|||
|
what do you mean by "pops"
|
|||
Top | |
FATT EF |
|
|||
|
{USERNAME} wrote: what do you mean by "pops" When the cable snaps and my foot hits the firewall. |
|||
Top | |
Mad2 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: what do you mean by "pops" When the cable snaps and my foot hits the firewall. ahhh! ok - did you check any of the cables BEFORE they broke ? |
|||
Top | |
FATT EF |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: what do you mean by "pops" When the cable snaps and my foot hits the firewall. ahhh! ok - did you check any of the cables BEFORE they broke ? Yep, they're all snapping at the clutch fork end. Where the metal nib is. |
|||
Top | |
Mad2 |
|
|||
|
have you got them connected as per factory?
|
|||
Top | |
cjh |
|
|||
|
Make sure there are no sharp edges at the insulator on the fork.
Also when fitting a new cable, lube that point with some thick Moly grease or Anti-sieze. Make sure the cable is adjusted properly too.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
Top | |
ranga83 |
|
||
|
make sure the centre isn't pulled out of the insulator, also make sure the 2 fingers are not bent
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
Top | |
cjh |
|
|||
|
{USERNAME} wrote: make sure the centre isn't pulled out of the insulator, also make sure the 2 fingers are not bent Yes, that too.....I had the 2 fingers go straight on me once.....had to replace the Insulator then.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
Top | |
ranga83 |
|
||
|
mine weren't level, and rubbed through the cable. peak hour, cnr of princes highway and ferntree gully rd
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
Top | |
FATT EF |
|
|||
|
Beaut! Thanks guys, i'll run through those things and see how we go.
|
|||
Top | |
Who is online |
---|
Users browsing this forum: falcon_dave, Google Adsense [Bot] and 25 guests |