|
| savage78 |
|
|||
|
hi there can i use rear lower trailing arms from a eb 1992 to go on a ea 1988
Last edited by savage78 on Sat Apr 02, 2011 11:00 pm, edited 1 time in total. |
|||
| Top | |
|||
| arm79 |
|
|||
|
The metal arms are the same, but the bushes arent.
So you're talking about a direct swap, no they won't fit. |
|||
| Top | |
|||
| savage78 |
|
|||
|
arm79 wrote: The metal arms are the same, but the bushes arent. So you're talking about a direct swap, no they won't fit. ok i was talking about a direct swap so how hard are the bushers to change mine in the EA 88 one need to be changed for a roadworthy |
|||
| Top | |
|||
| arm79 |
|
|||
|
You'll obviously need new bushes and a 6ton press with appropriate tools to push the old out and new in.
|
|||
| Top | |
|||
| arm79 |
|
|||
|
Oh.. is the EB an EB1 or EB2?
|
|||
| Top | |
|||
| savage78 |
|
|||
|
arm79 wrote: Oh.. is the EB an EB1 or EB2? the ones that need to be changed are EA 88 but i have a EB 92 with good ones in them so i thought i could take the whole lower rear trailing arms and put them form the eb 92 to the ea 88 |
|||
| Top | |
|||
| arm79 |
|
|||
|
I ask because EB1's had the same trailing arms as an EA. EB2 onwards are different.
|
|||
| Top | |
|||
| savage78 |
|
|||
|
arm79 wrote: I ask because EB1's had the same trailing arms as an EA. EB2 onwards are different. i ve had a good look i think they will fit i going to try i dont have anything to lose if i win then i dont have to spend money just thought some one could tell me first before i pull them off to safe hard work thats thank for your time and input i will post back how i go |
|||
| Top | |
|||
| EA-SPAC-88 |
|
||
|
eb s2 changed to live axel diffs, which then changed their bushes in the lower trailing arms, i had the same problem, the uppers fit from ea-el. i bought new nolathane uppers and lowers which cost me around $350 from repco, but that was with a staff discount.
Cheers, Brandon |
||
| Top | |
||
| TROYMAN |
|
||
|
EA-SPAC-88 wrote: eb s2 changed to live axel diffs, which then changed their bushes in the lower trailing arms, i had the same problem, the uppers fit from ea-el. i bought new nolathane uppers and lowers which cost me around $350 from repco, but that was with a staff discount. Cheers, Brandon  what are you on about, all e series are live axle... 
|
||
| Top | |
||
| EA-SPAC-88 |
|
||
|
[/quote]
what are you on about, all e series are live axle... [/quote]i stand corrected, i read somewhere they never had them. never mind |
||
| Top | |
||
| TROYMAN |
|
||
|
EA-SPAC-88 wrote: i stand corrected, i read somewhere they never had them. never mind maybe your thinking of something else? falcons have been live axle since the first falcon in the 60's.. xe/xf sedans were the first to change from leaf springs to the 4 link rear end and it has been the same up to au where some have irs.. |
||
| Top | |
||
| savage78 |
|
|||
|
well ok guys im stuck my roadworthy place have said to change lower rear trailing arm bushers now when i look in the book is the real name for them lower control arm
|
|||
| Top | |
|||
| cjh |
|
|||||||
|
EA/EB1 lower trailing arms are different to EB2/ED. The upper trailing arms are the same, except for the XR6 ones.
I have EA trailing arms in my ED.....I made spacers for them.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||||||
| Top | |
|||||||
| savage78 |
|
|||
|
thanks cjh i found that i have a eb2 so cant use them went a got bushers for then doing them now
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 22 guests |
