|
Brett3158 |
|
||
|
Looking for a heavier swaybar for my ebI. Is it true that xh ute is heavy and fits, or is there a better (cheap) option. Is it worth replacing both or will front be sufficient. Car is lowered on pedders (not too low). What sizes/brands do people recommend?
|
||
Top | |
Steady ED |
|
|||
|
XH Ute front bar is the same as EL GT I believe.
These can be had pretty cheaply (under $100 iirc), from Ford still. Think they are 28mm? There was some confusion a while back over whether they were 28mm or 29mm. I had/have Whiteline front and rear bars, 27mm front and 24mm rear. Front was around the 130 mark, rear was 150 from memory. They also do a 30mm front, and blade adjustable 30mm front and 24mm rear bars. I like the Whiteline products (shutup everyone else, that was restrained pimpage ). Pedders do them as well, but I've never heard of anyones experience with them or what sizes/cost. For the cost, I would get the EL GT/XH front, and a Whiteline 24mm rear. Bigger rear bars are a personal taste sort of thing. Alot of people don't bother with them, but I found my car was alot more neutral when I had the bigger rear bar, with the option of liftoff oversteer if you wanted it Hope that essay helps
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
Top | |
RJ-3820 |
|
||
|
{USERNAME} wrote: There was some confusion a while back over whether they were 28mm or 29mm.
28mm mate
_________________ Its people like you that make people that kill other people, sleep easier at night. |
||
Top | |
Steady ED |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: There was some confusion a while back over whether they were 28mm or 29mm. 28mm mate Thought so anti-Jared. Cheers.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
Top | |
Brett3158 |
|
||
|
Thanks steady and unsteady. Heavy ford front bar sounds the go. Does it come with new end rods and middle mounts? Will standard mounts fit or is this an extra?
|
||
Top | |
Steady ED |
|
|||
|
Standard mounts will fit, but you will need the D-Bushes inside the mount to suit the fatter bar.
End rods (swaybar links) will be fine, but I highly recommend you replace the bushes, old ones will probably be f**k anyway. A few different guys do them in polyurethane type stuff. Whiteline recommended you lubricate the inside of the mount bush with 'lithium grease' as well, something to keep in mind.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
Top | |
Brett3158 |
|
||
|
Hey Steady Does the whitline product come with the D bushes. BTW I know that EB1 and others have different end links on the end of the rear sway bar. Is front the same for EB1 c/w other models? Thanks for your help.
|
||
Top | |
Steady ED |
|
|||
|
Yeah Whiteline comes with them, SHOULD come with all bushes, however, Whiteline have a bit of a reputation for sending out thw wrong bushes, or none at all.
Others have got the wrong D bushes, fitted them unknowingly, and ended up with knocks they couldnt chase down. I got all the D bushes, but only half a set of swaybar links... I don't know if they fixed up there delivery process, as this was about a year ago now! I don't know about differences between EA-EBI and EBII onwards, only dealt with my ED. Didn't think of that when I recommended the EL GT bar... maybe someone else can clarify?
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 27 guests |