|
twr7cx |
|
|||
|
{USERNAME} wrote: Steady ED, do you have a part number for the sway bars?
can be found on whiteline website. |
|||
Top | |
XRated |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: Steady ED, do you have a part number for the sway bars? can be found on whiteline website. Yeah I know, but there are different types, ie. replacement, extra heavy duty and adjustable. I've priced the heavy duties at around 170 a piece. Front: BFF35AX Rear: BFR35 |
|||
Top | |
Steady ED |
|
|||
|
{USERNAME} wrote: Yeah I know, but there are different types, ie. replacement, extra heavy duty and adjustable. I've priced the heavy duties at around 170 a piece.
Front: BFF35AX Rear: BFR35 I THINK from memory 'X' indicates an adjustable bar. Where are you getting prices from XRated? I got ridiculously overquoted by Bursons, before I went to Autobarn who gave me a much better price. $170 a piece is over the top for non-adjustables IMO.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
Top | |
nicco |
|
|||
|
X is oversized
Z is adjustable $170 is the price directly from whiteline... I wish i had of known bout autobarn selling the stuff. CastleGreySkull, Steady ED has said everything i would of had i seen the thread first. ha ha ha Blu Falc, i have stocko SS diff, its fine, just takes a bit of finess on the throttle, but thats the same as without big swaybars. |
|||
Top | |
Steady ED |
|
|||
|
I'll chase up my receipt if you want xrated, get the part numbers and cost (from Autobarn Sunbury) straight off there.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
Top | |
uglybob |
|
|||
|
as steady said - i picked up my EL GT swaybar (front) from ford for $75 brand spankers - they're 29mm ones. yet to fit it, so its just taking up space in the garage lol
_________________ R.I.P. Scotty |
|||
Top | |
Steady ED |
|
|||
|
{USERNAME} wrote: as steady said - i picked up my EL GT swaybar (front) from ford for $75 brand spankers - they're 29mm ones. yet to fit it, so its just taking up space in the garage lol
29 not 27.. my bad You bought that ages ago! Get off your a** and fit it, it's not that hard! Castlegreyskull and xrated, if your Ford dealer stocks the EL GT bars still, and for that price, I'd get one of those, I'm not sure how much of a difference it would make balance wise though. If anything it would lean it a bit towards oversteer. Even 1mm can make a difference. According to... http://www.whiteline.com.au/docs/bulletins/010barup.pdf A 29mm bar is approximately 113% stiffer then a 24mm, and the 30mm is approximately 144% stiffer then the 24mm.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
Top | |
uglybob |
|
|||
|
the car isn't driven very often now, so theres no rush to get it fitted
i had mine freighted over from east - so there are still the GT ones around, and any dealer should be able to get them in the rear ones are over $350 though!
_________________ R.I.P. Scotty |
|||
Top | |
XRated |
|
|||
|
{USERNAME} wrote: I'll chase up my receipt if you want xrated, get the part numbers and cost (from Autobarn Sunbury) straight off there.
That'd be good if you could. I can't understand how buying direct from Whiteline is more expensive!!!! Hopefully I'll be able to order it through Autobarn near me. But I've really got to stop spending money on my car LOL! |
|||
Top | |
nicco |
|
|||
|
x rated, thats what i thought too... but it was a couple o hundred more than steady paid going through autobarn... :S
and dont bother stopping spending money on the car.. its too much fun!! |
|||
Top | |
Steady ED |
|
|||
|
{USERNAME} wrote: That'd be good if you could. I can't understand how buying direct from Whiteline is more expensive!!!! Hopefully I'll be able to order it through Autobarn near me. But I've really got to stop spending money on my car LOL!
I put a reminder on my phone, I'll dig up the receipt tonight Stop spending money on cars? Pfffft... been there, tried that... It's too hard!
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
Top | |
Steady ED |
|
|||
|
FOUND IT!!! 'twas harder then I thought... Whiteline part numbers are the second set of numbers. First set is probably Sunbury Autobarns item code.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
Top | |
XRated |
|
|||
|
Thanks, you're a champion!
The prices are very similar to Whiteline I guess - I see your front sway bar is the heavy duty, not the "extra" heavy duty. But after all the stories of sway bar mounts breaking, I don't think the extra mm or two is gonna be needed heh.... Does anyone know a performance shop or something that gets Whiteline gear? |
|||
Top | |
Steady ED |
|
|||
|
I don't think there is an extra heavy duty for EA-EL.
My front is the 30mm bar. Rear is 24mm I think. I always forget Only other bar option I know of is Adjustable. Whiteline do custom bars though. Only performance shop I know of that stocks them is Centreline Suspension in Thomastown. Never been there myself, but they seem to have a good rep. I intended on getting mine fitted there, before I went the cheap way out and fitted it all myself.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
Top | |
XRated |
|
|||
|
You can get:
Heavy duty (27mm?): BFF35A $134+GST Extra heavy duty (30mm?): BFF35AX $172+GST Blade adjustable (??-??mm): BFF35AZ $242+GST I might head down to Autobarn today. |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 52 guests |