Fordmods Logo

tie rod lock tab washers 

 

Page 1 of 1 [ 11 posts ] 

 
 Post subject: tie rod lock tab washers
Posted: Wed Nov 29, 2006 8:09 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

I got TRW replacement tie rods, stingy pricks don't include new lock tab washers, I take it Fraud Spare Parts will be the only place then?
Top
 Profile  
 
 
Posted: Thu Nov 30, 2006 8:00 am 
Getting Side Ways
Offline
User avatar

Age: 50

Posts: 2705

Joined: 6th Nov 2004

Gallery: 11 images

Ride: 2009 FG XR6 Sedan

Location: Melbourne
VIC, Australia

I know some wont agree with me here but all i did was after they were out was bend them flat and fit them back on 180 deg so as a new part of the washer can be bent over. Around 80,000 k's later ive had no rack ends fall out....
Top
 Profile  
 
 
Posted: Thu Nov 30, 2006 8:25 am 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

Hmmmmmm... It's a decent idea. If I cant source new ones.
Top
 Profile  
 
 
Posted: Thu Nov 30, 2006 10:18 am 
Getting Side Ways
Offline
User avatar

Age: 50

Posts: 2705

Joined: 6th Nov 2004

Gallery: 11 images

Ride: 2009 FG XR6 Sedan

Location: Melbourne
VIC, Australia

I guess there is no harm in using them twice but no more than that, but then again the car itself would be worn out by then after 2 sets of rack ends!!
Top
 Profile  
 
 
Posted: Thu Nov 30, 2006 11:21 am 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

joolz wrote:
I guess there is no harm in using them twice but no more than that, but then again the car itself would be worn out by then after 2 sets of rack ends!!


Well mines got 700,000km's on it now, so wouldn't suprise me if they've been changed a few times now aye!?! :wink:
Top
 Profile  
 
 
Posted: Thu Nov 30, 2006 12:37 pm 
Getting Side Ways
Offline
User avatar

Age: 50

Posts: 2705

Joined: 6th Nov 2004

Gallery: 11 images

Ride: 2009 FG XR6 Sedan

Location: Melbourne
VIC, Australia

Mines still a baby then, just on 220,000 k,s. I did both of mine around 80,000 k's ago but only the passenger side was gone.
Top
 Profile  
 
 
Posted: Thu Nov 30, 2006 1:16 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

I went back to work and got the cheaper Silverline brand ones, and suprisingly they came with the washers, but not the nuts (the TRW ones come with the nuts). But I didn't really wanna use them as there cheaper and probably inferior quality.
So I went to Fraud Spare Parts (Tilford down here) and they had some, $9.74 for the pair which isn't too bad.
Top
 Profile  
 
 
Posted: Thu Nov 30, 2006 1:21 pm 
Getting Side Ways
Offline
User avatar

Age: 50

Posts: 2705

Joined: 6th Nov 2004

Gallery: 11 images

Ride: 2009 FG XR6 Sedan

Location: Melbourne
VIC, Australia

I think i paid $41 for the pair of rack ends with no nuts or washers from Burson. Fraud wanted $57 each!
Top
 Profile  
 
 
Posted: Thu Nov 30, 2006 1:27 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

joolz wrote:
I think i paid $41 for the pair of rack ends with no nuts or washers from Burson. Fraud wanted $57 each!


$41 for thje pair is a good price. I get my stuff for not much more than cost being an employee, and it wasn't that much lower...
Top
 Profile  
 
 
Posted: Thu Nov 30, 2006 8:09 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 557

Joined: 20th Aug 2006

Gallery: 4 images

Ride: EF

Location: Keilor, Melbourne
VIC, Australia

i know it wont help, BUT i did trying telling you a few days \ week ago that you will need to change them....bah...

 

_________________

<img src="http://i29.photobucket.com/albums/c260/demoniquekryes/Bothcars1.jpg" alt="Photobucket - Video and Image Hosting"><br><br>

Top
 Profile  
 
 
Posted: Thu Nov 30, 2006 10:21 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

hellbent_ef wrote:
i know it wont help, BUT i did trying telling you a few days \ week ago that you will need to change them....bah...


Yeah i assumed they'd be included. Anyways all changed and new now.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 99 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Nov 16, 2024 1:54 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names