|
| 66 coupe |
|
||
|
you got problems then - could be fuel
|
||
| Top | |
||
| Scaffy |
|
|||
|
yeah, I figured I had problems...
It makes a lot of noise but feels like it's doing nothing above that. When you say it could be fuel, injectors? pump? both?
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| 66 coupe |
|
||
|
start by changing the filter and then put a fuel pressure gauge on it and see what that shows you.
You'd need to also watch the air/fuel ratio's etc and see what they show, it could also be a tune problem. |
||
| Top | |
||
| Scaffy |
|
|||
|
Back on the diff topic...
What size diff is in our cars? Is it 8.8"? Just looking on the Summit site and want to order a new diff cover with my engine bits to go on when I get it rebuilt. Would these gears fit? http://store.summitracing.com/partdetai ... toview=sku
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| Scaffy |
|
|||
|
anyone?
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| 66 coupe |
|
||
|
no, the 8.8 parts wont fit.
The borg warner diff is a 78 series, therefore is approx 7.8" also you pronbably wont find a diff cover to suit it outside of australia either. You'd be much better off sourcing the gears locally as freight will cost you more then they are worth |
||
| Top | |
||
| Scaffy |
|
|||
|
ah ok... thanks for that mate... *phew*
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| Scaffy |
|
|||
|
I got the diff oil changed out yesterday when the rear rotors were getting replaced. Only an extra $20 and $20 well spent! It's given the diff a whole new lease on life. They reckon it probably hadn't been changed since the car rolled off the showroom floor. I've given it a bit of s**t and tested it out on a couple of corners where my right wheel went silly and now it just goes.
I'd recommend it to anyone who feels their diff seems to be lacking.
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| XH5LWEPN |
|
|||
|
So scaffy mate, are ya still looking at rebuilding the LSD and getting different diff gears?
If so i have to agree with Aldo @ AD Diffs in Balcatta, got my last ute done there(3.73's in the auto 4L) and done a top job and great price.
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| Tocchi |
|
|||
|
what did the 3.73's cost you including fitting and such?
|
|||
| Top | |
|||
| XH5LWEPN |
|
|||
|
Tocchi wrote: what did the 3.73's cost you including fitting and such?
$1000, but you can get that and a brand new LSD centre fittted with the 3.73 gears for around the $1400 mark but i couldnt afford the extra $400 at the time. Definately better off doing both at the same time.
_________________ STREETBUILT RACING |
|||
| Top | |
|||
| Tocchi |
|
|||
|
hmm ok... cos im thinking of putting the 3.73s in XR6 (auto) and putting the XRs 3.45 in the ute (has lokka)
i might give them a ring to see how the diff gears alone are. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 60 guests |
