|
| Tezza393 |
|
|||
|
this has prolly been asked a jillion times but here i go,
i have a slugmatic in my NL and its getting into the hot season and people have said about getting a trans cooler. is this a good idea? whats it good for? how much is a kit worth and is it hard to set up thanks all for you time Tezza aka SDFGH_54
_________________ Current Ride - Phantom BA XR6 Turbo |
|||
| Top | |
|||
| madmax |
|
|||
|
Always a good idea!
Cost is around $140-$150 for a Drivetech Unit if you install it yourself. Around $300 installed. I had a Ford one installed in my BA as it is still under warranty. One dealer quoted me $440. Through another one it cost me $312
_________________
|
|||
| Top | |
|||
| Tezza393 |
|
|||
|
thanks for the quick reply,
just had a quick look on ebay and found a seller for the drivetech for 150, and i also saw a cooler http://cgi.ebay.com.au/ws/eBayISAPI.dll ... %3AIT&rd=1 it is 35$ which is alot cheaper, and it couldnt be hard to make brackets up, does the trans require some super good hoses or is there something really special about the drivetech cooler compared to the cheaper one? just looking to see if i can get away with this cheaper
_________________ Current Ride - Phantom BA XR6 Turbo |
|||
| Top | |
|||
| arm79 |
|
|||
|
Be careful with larger trans coolers. There is almost zero room under the bumper of an EL/NL Ghia to fit a transcooler. And you dont want one that is too big that will block airflow.
The genuine Ford trans cooler kits are around $155. Come with the cooler, mounting brackets and pipes. {DESCRIPTION} Davies Criag package a genuine Ford cooler with their own piping and dodgy custom made brackets for $140 from Bursons. The Ford units are rather small (not much bigger than your palm) and get bagged because of that, but they are effective. After a year of having one installed which included a fair bit of driving abuse, lots of summer heat driving (both towing a boat or jetski and normal summer cruising), the trans oil is as red as the day I put it in. So I can say they must be fairly effective. Either will require removal of the front bar and a pipe cutter to install. Takes about an hour or so to do the job. |
|||
| Top | |
|||
| madmax |
|
|||
|
I agree. I had a genuine Ford cooler in my EL. It was in there when I bought the car and it also seem to work fine.
Previously I installed a Davis Craig into my EA. That also seem to do the job. The Drivetech unit was recommended to me for the BA. Until concern was raised about its effect on the cars warranty. Incidently the genuine ford cooler in the BA is about 3 inches high and goes the full width of the radiator. What ever cooler you decide to buy, don't use those crap plastic strips to mount it. Buy one with, or make up you own brackets, so it doesn't sit on the AC condensor.
_________________
|
|||
| Top | |
|||
| Tezza393 |
|
|||
|
just another quick qwestion, how do i hook up one of these things, the mounting i understand, but is there hoses coming from the trans that i cut and hook up the cooler? or wat??
things are so much easier being manual and carby ohhh were have thoes days gone
_________________ Current Ride - Phantom BA XR6 Turbo |
|||
| Top | |
|||
| TerroristGHIA |
|
|||
|
If you look on the drivers side of your radiator, you will see 2 10mm steel pipes below the top radiator hose. The V8 ghias had a trans cooler as standard, but if you want to go bigger this is where you get your pickup from.
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| Tezza393 |
|
|||
|
ahh yea i see it, so on a scale of one to ten, ten being the lowest, how well does that little fella werk, is it worth getting a bigger one since i dont tow anything and dont put the trans under lots of strain
_________________ Current Ride - Phantom BA XR6 Turbo |
|||
| Top | |
|||
| msman |
|
||
|
if you can afford it get it, will save you getting the tranni rebuilt if you plan to keep the car for a while.
I'll put it this way, we've so far had two cabs an ef and an au2, the ef with small extra tranni cooler from factory just started to shift badly by 900,000k's with the factory tranni the au2 with just the radiator cooler on the other hand has gone through 2 tranni's in the same amount.
_________________ why do u write in here. |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
There may also be a small factory cooler on the front of the radiator. Mine had one as well as the radiator cooler, but it was the little one that was upgraded in mine. Best way to check is to pull the front bar
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| Tezza393 |
|
|||
|
ill be ripping it off later to get a better look and flush my radiator while im there, its due for a service,
Thanks for all your time you have been a great help Tezza
_________________ Current Ride - Phantom BA XR6 Turbo |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 35 guests |
