|
| frankieh |
|
|||
|
Hi all,
I've decided to give my diff a clean up.. so I've pulled it out.. I'm gonna paint the outside.. change the handbrake shoes and the pads and give it a general clean up. When I did my gearbox I only found about about transmaxZ after I'd already put castrol gear oil in the box so it was too late. This time I want to know what the best oil for a BW LSD diff before I do it so I don't buy the wrong stuff. Is there any else I can do? the diff makes no noise and it has no significant slop.. but I'd like to keep it that way. suggestions == welcome. ta Frank |
|||
| Top | |
|||
| revcore |
|
|||
|
Penrite Pro Gear LSD oil...I use it in the LSD in my AU V8 ute and I've never had any problems.
{DESCRIPTION}
_________________
|
|||
| Top | |
|||
| snap0964 |
|
|||
|
You might as well take the diff hat off.
http://www.9bolt.com/technical.html
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| frankieh |
|
|||
|
thanks guys. much appreciated
|
|||
| Top | |
|||
| efxr6wagon |
|
||
|
Redline synthetic works a treat: http://www.redlineoil.com/product.aspx?pid=134&pcid=4. The local Ford dealership uses this in Falcons as most noisy diff problems disappear.
_________________ 95 EF XR6 wagon, 17" FTRs, DBA rotors, KYB/Koni, AU bottom end, ported EF head, backcut valves, SS Inductions, Territory intake, 10.2 CR, Auckland 1258 cam, vernier gear, PH4480 headers, no cat, Tickford 2.5", 2800rpm stall, J3 chip |
||
| Top | |
||
| ebxr82nv |
|
||
|
Nulon ls90. Ford Motorsport also makes a nice additive which improves the performance.
_________________ 9/98 AU1 XR6hp-about to retire from the road and be reborn on the race track. |
||
| Top | |
||
| cjh |
|
|||
|
I use Penrite Limslip 140.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| frankieh |
|
|||
|
I had a voucher for 100 bucks from AutoOne so I went there to get the redline and the guy said they didn't keep it in stock as it was too expensive and didn't sell much.
I ended up getting the Penrite Limslip and some coolant for my 100 bucks. The guy said it was a synthetic and cost about $59 from memory. cheers Frank |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 19 guests |
