|
| Xflow |
|
|||
Age: 36 Posts: 721 Joined: 31st Dec 2005 Ride: EF V8 Futura, 180sx Location: Brisbane, Burpengary |
hey guys
i just bought a t5 conversion for my ef falcon today from wreckers for $600 everthing there except gear stick boot and knob and the spigit bearing and spigiot bearing ecu the clutch looks like brand new and fly wheel looks like it was machined before the clutch was installed. It selects all gears really easy which im happy with so what oil do you guys use??? i know ford manual book say dexron II but dose anyone run something like dexron III or dextron TQ 95 or 75/85 ????? and what brand oil you guys use??? i got free access to dexron III TQ and castrol 75/85 these anygood? i will be honnest im ganna be pushing the box hard so i really want to use something good to protect it what your suggestion???
_________________ Ford EF Futura Black
|
|||
| Top | |
|||
| Krytox |
|
|||
|
I use Castrol Tranzmax Z (about $60 for 4 liters)
Its fully synthetic and I aint going back to mineral. I have used these: Dex 3 with lubrizol 7906 and Penrite Light gear oil all good and all quiet. The best so claimed oil is Redline shockproof light. ohh: kinda hard to machine after the clutch is installed! =D
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| Xflow |
|
|||
Age: 36 Posts: 721 Joined: 31st Dec 2005 Ride: EF V8 Futura, 180sx Location: Brisbane, Burpengary |
{USERNAME} wrote: kinda hard to machine after the clutch is installed! =D ??????? i said it has been machined before new clutch was installed. Quote: the clutch looks like brand new and fly wheel looks like it was machined before the clutch was installed.
ill give them oil's look tomorrow morning give coventrys a buzz and get a few quotes
_________________ Ford EF Futura Black
|
|||
| Top | |
|||
| cheersdude |
|
|||
|
Just use the Dextron III as per:
{DESCRIPTION} Thats what I use 
_________________
|
|||
| Top | |
|||
| cjh |
|
|||
|
I use a mix 80/20.........ATF DEX III and VMX80 ( all Castrol ) with an additive, Nulon G70. Works well, even in the cold.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| the_scotsman |
|
|||
|
I also use Castrol Transmax Z...its good s**t!
|
|||
| Top | |
|||
| ilovmel |
|
||
|
dex 3 is the best sincrows work better
_________________ i am in need of a new front bar or good condation secondhand for a 95 ef futra,
|
||
| Top | |
||
| cjh |
|
|||
|
{USERNAME} wrote: dex 3 is the best sincrows work better
Synchro's...................for Synchromesh
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| forsaken |
|
||
|
i think mine has valvoline semi-synth 75W in it at the moment. it had dex II in it and i changed it in an attempt to get the rattle in neutral to go away but it didnt seem to make any difference
_________________ 1997EL 5spd
|
||
| Top | |
||
| twase |
|
|||
|
Factory recomendation used to be ATF Dextron II plus Lubrizol additive. There seems to be no clear winner in the oil stakes for T5's factoring in price qualities and availability, do a search and read the numerous threads and make your own mind up from that. If its free then Castrol 75/85 will be OK but the syncros balk when cold (read canberra cold).
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| DrE |
|
|||
|
ahh i was wondering why a freshly rebuilt t5 i had done would crunch a little bit into 3rd on quick changes while the box is cold, im just using castrol d3 and used the same in the last 3 manual falcons ive had, no dramas
_________________
|
|||
| Top | |
|||
| the_scotsman |
|
|||
|
I believe Mal Wood uses Transmax Z in their T5 boxes, so that's good enough for me.
|
|||
| Top | |
|||
| Xflow |
|
|||
Age: 36 Posts: 721 Joined: 31st Dec 2005 Ride: EF V8 Futura, 180sx Location: Brisbane, Burpengary |
well i got dexron III from work today so ill give that a go with some Lubrizol additive ford recommend and see how that goes.
won't cost me a thing really if runs crap with it ill use some thing else like Transmax Z
_________________ Ford EF Futura Black
|
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
{USERNAME} wrote: I believe Mal Wood uses Transmax Z in their T5 boxes, so that's good enough for me.
I asked Ben Wood the other day and he recommended Dexron III. Then i asked about the additives he said dont use them, then i asked one of the workers there about oil and he said to use Transmax cause the Dexron stuff wears the syncros out quicker. Seems you cant get a straight answer even with a gearbox specialist |
||
| Top | |
||
| TROYMAN |
|
||
|
well its up to the individual.
i would say use 70/80 light gear oil.. i had 80/140 gear oil in my gearbox and its been sweet (except alittle stiff on the cold gear change) untill i changed the oil to dexron3 the shift is smoother but since i swapped over to trans fluid the box has a noticable input shaft/ bearing noise.. so im going to change back to gear oil .. and i know that ford recommend trans fluid for the 6cyl t5 but if you take a look at the v8 t5 they use light gear oil..??why?? the boxes are the same except for input shaft length.. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
