|
| tinyfox |
|
||
|
Is it a major pig to do the rear wheel bearings? I've heard its a major job.
_________________ Tim
|
||
| Top | |
||
| cjh |
|
|||
|
You need the tools and knowledge to do it, if you don't, get someone who does. If you stuff it, it will cost you more than to get somebody to do it.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| xf_xr6 |
|
||
|
i'll be doing mine soon, let you know how i go
|
||
| Top | |
||
| tinyfox |
|
||
|
That'd be great xf.
_________________ Tim
|
||
| Top | |
||
| ReGiE |
|
|||
|
they are pressed onto the axles so if u havent got the tools get someone to do it for u
_________________ Gooooone - Eb2 Coon - 143RWKW |
|||
| Top | |
|||
| tinyfox |
|
||
|
I heard you have to take the whole axle out???
_________________ Tim
|
||
| Top | |
||
| fairmont599 |
|
||
Posts: 1135 Joined: 27th Oct 2005 |
yea u do, if u take them out and get someone to get the old off and the new on with a press it wont cost too much. they are very f**k hard to get off. i know from experience, i had to get em off for work experience at ford.
|
||
| Top | |
||
| Redford |
|
|||
|
you need a bench hydraulic puller cos they are pressed in, i had allready taken my axle out when i realised.
_________________ Speed Safely! |
|||
| Top | |
|||
| tinyfox |
|
||
|
Looks like I'll leave it to someone who does this stuff for a living...
Any ideas on how much it is likely to cost?
_________________ Tim
|
||
| Top | |
||
| daggy082 |
|
|||
|
tinyfox wrote: Looks like I'll leave it to someone who does this stuff for a living...
Any ideas on how much it is likely to cost? Just cost me about $90 to get mine done... $24 for bearing and $66 for fitting... but i dont know if i got ripped off though 
_________________
|
|||
| Top | |
|||
| tinyfox |
|
||
|
Sounds reasonable to me Daggy. I vaguely recall someone saying about $120.
The "whoosha whoosha" sound (which is why I'm thinking bearings) could also be the tailshaft bearing or not? Can't be the tyres or balance as I've only just had that checked out.
_________________ Tim
|
||
| Top | |
||
| daggy082 |
|
|||
|
tinyfox wrote: Sounds reasonable to me Daggy. I vaguely recall someone saying about $120.
The "whoosha whoosha" sound (which is why I'm thinking bearings) could also be the tailshaft bearing or not? Can't be the tyres or balance as I've only just had that checked out. Mate same boat as me... i had that whoosha whoosha lol sound as u call it... i had all my suspension checked and new tyres put on 2 days b4 replacing bearings... so good chance it would be a bearing....
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 109 guests |
