|
| smoke_ |
|
|||
|
I need to balance my tailshaft in my ute (XE).
Does anyone recommend or know of a place in brisbane that does them? Cheers.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| scott250 |
|
|||
|
Not quite Brisbane but i've used Gibbs Truck Parts at Labrador on the coast. Maybe theres one near you? or similar.
|
|||
| Top | |
|||
| smoke_ |
|
|||
|
i found one today, driveline services in archerfield.
might go pull the tailshaft out tonight. cheers.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| smoke_ |
|
|||
|
just pulled out the tailshaft, and the uni joint roller bearings were pretty much rooted.
grains of sugar had more thickness than the rollers. it looks like melted cheese. thank f**k i wasnt' gonna drive it tomorrow, it wouldn't have lasted long.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| XR8Chic |
|
|||
|
FYI. I got my old tailshaft from Brisbane Driveline something... (they had a pink sticker on the tailshaft)
The "Brand New" shaft they sold me, was a 2nd hand one, they had heated with an oxy torch to straighten, and then painted. It ripped in 2 peices. Caused a lot of damage to my car. I now have a custom made 2 peice from Mal Wood Automotive.
_________________ 1993 ED XR8 - Poly Green |
|||
| Top | |
|||
| noisy |
|
||
|
Send it up to mal wood he's only in Warwick
_________________
|
||
| Top | |
||
| smoke_ |
|
|||
|
xr8chic - that's dodgy, did you pursue them?
i've left it with driveline services. a good mate of mine did his a little while back and was real happy with it. off topic a bit: - whats it worth to get a loop for the tailshaft?
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| noisy |
|
||
|
tailshaft loops arent real dear
_________________
|
||
| Top | |
||
| EL XR8 |
|
|||
|
You can make one up yourself in under an hour.
|
|||
| Top | |
|||
| janek |
|
||
Posts: 413 Joined: 14th Nov 2004 Ride: 2000 AU II Fairmont Ghia Location: Brisbane Most of the time/Sydney Some of the time |
{USERNAME} wrote: FYI. I got my old tailshaft from Brisbane Driveline something... (they had a pink sticker on the tailshaft)
The "Brand New" shaft they sold me, was a 2nd hand one, they had heated with an oxy torch to straighten, and then painted. It ripped in 2 peices. Caused a lot of damage to my car. I now have a custom made 2 peice from Mal Wood Automotive. how much the mal wood one set you back?
_________________ Organza 2000 AU 2 Fairmont Ghia
|
||
| Top | |
||
| GTBob |
|
|||
|
Gibbs do a great job Mal wood also but freight is a little dear. NOT driveline services (had some dodgy ones from them)
 
_________________ Rotten Old Revhead!!! XW GTHO + EF ex cop car (exractors 2.5 cat back zorst !6" Simmons K&N +airbox mods Lowered with Bilstein shocks+Whiteline Bars NEXT THING Swap HO for GTP or Ferrari! |
|||
| Top | |
|||
| smoke_ |
|
|||
|
true?
mine still dosen't feel right, there is a slight shake there at 80+km/h.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| joolz |
|
|||
|
If the drive shaft has imbalance it doesnt shake unless the runout is say over 5mm. They will hum and normally over 80 km/h.
Your shaft probarbly wont need to be balanced after the UJ has been replaced. |
|||
| Top | |
|||
| XR8Chic |
|
|||
|
Tail shaft looks are about $50 ish from rare spares.
I tried to speak to the dodgy Brisbane Driveline place about the tailshaft, but I couldnt prove the shaft that broke was there one (even though it had there sticker on it) The 2 peice tailshaft from Mal Wood - I think it was around the grand mark.
_________________ 1993 ED XR8 - Poly Green |
|||
| Top | |
|||
| smoke_ |
|
|||
|
{USERNAME} wrote: The 2 peice tailshaft from Mal Wood - I think it was around the grand mark.
Who installed the middle link/brace for you, or did you do it yourself?
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 48 guests |
12.06@120MPH
